.

Metallic Cables and Wire Ropes Mechanical Property Tester

Standard

YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue strength and load-to-failure requirements.

ASTM F2180-19 (International): Defines methodologies for evaluating the dynamic fatigue performance of orthopedic cable systems under cyclic loading.

ISO 12177-3: Additional compliance for tension-tension fatigue testing of surgical cables.

Product Advantages

Multi-Axial Loading: Simultaneous tension/torsion control replicates in vivo stress patterns (5Hz fatigue cycles).

High-Cycle Endurance: 1.000.000-cycle capacity with ±0.05% load accuracy at 5Hz operation.

Biorelevant Simulation: 37±1°C saline bath with protein skimmer for in vitro corrosion testing.

Smart Fixturing: Self-centering clamps accommodate cables (1.0–5.0 mm diameter) and cable systems.

AI-Powered Analytics: Machine learning identifies fatigue initiation sites in real-time.

Regulatory Compliance: Pre-loaded YY/T 0812/ASTM F2180 protocols with automated reporting.

Product Features

Electromagnetic Servo Actuator: 10 kN tensile/5 Nm torsional capacity with programmable load ratios (R=0.1–10).

Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Chamber: 37±0.5°C recirculating saline bath with anti-evaporation design.

High-Resolution Imaging: Built-in 5MP camera system for fretting/corrosion analysis.

Safety Suite: Emergency stop, overload clutches, and leak detection system.

Modular Design: Dual-station configuration enables simultaneous specimen testing.

Accessories

Cable Fixture Kit:

Self-centering clamps (1.0–5.0 mm cable compatibility)

Torsion adapters for multi-strand cables

Thermal-Mechanical Bath:

20L capacity with recirculating pump

Corrosion-resistant titanium interior

CableTest Pro Software:

Automated S-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated micrometer set (0.01–1.00 mm)

Cable alignment jigs (ASTM F2180 compliant)

Calibration Bundle:

NIST-traceable force/torque calibration weights

LVDT verification tool

Safety Kit:

Leak detection system

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

ParameterSpecification
Max. Tensile Load ±10.000 N (0.01 N resolution)
Max. Torsional Moment ±5 Nm (0.001 Nm resolution)
Frequency Range 0.1–30 Hz (0.01 Hz increments)
Load Ratio (R) 0.1–10 (adjustable)
Cable Diameter Range 1.0–5.0 mm (0.01 mm resolution)
Saline Bath Temperature 37±0.5°C (PT1000 sensor)
Data Sampling Rate 10 kHz (synchronized across 8 channels)
Power Requirements 220V/110V ±10%, 50/60Hz, 1.800W
Dimensions (W×D×H) 600 × 500 × 800 mm
Weight 90 kg (net) / 105 kg (with bath)
Noise Level <55 dB (A-weighted)

Отправить запрос, связаться с поставщиком

Кому: Qinsun Instruments Co., LTD
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Fabric Downproof Tester(Rolling Box)
Fabric Downproof Tester(Rolling Box) Fabric anti-drilling velvet testerMainly used in the production of down products and fabric of the anti-drilling velvet test, used to assess a vari...
Intramedullary Nails Internal-fixation Pull-out Force Tester
Intramedullary Nails Internal-fixation Pull-out Force Tester Standard ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols). ISO 12172: Implants for surgery—Pa...
Geosynthetic Clogging Tester
Geosynthetic Clogging Tester Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s...
Thermal - Cold Cycle Testing Machine
Thermal - Cold Cycle Testing Machine Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification...
New energy wire and cable extrusion & scraping tester
New energy wire and cable extrusion & scraping tester Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ja...
Все товары поставщика

Похожие товары

Custom Stainless Components for OEM Applications
Custom Stainless Components for OEM Applications Продавец: Yongjia County Yaokang Technology Co., Ltd. Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Продавец: Коллирон электроникс лимитед Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...