Coatings Shear tester

Standard

YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bending fatigue tests.

ASTM F384-17 (International): Defines methodologies for evaluating the static and fatigue performance of orthopedic angular stabilization devices.

ISO 12177-2: Additional compliance for four-point bending fatigue testing of bone plates.

Product Advantages

Multi-Axial Testing: Combines single-compression bending and fatigue testing in one modular system.

High-Precision Actuation: Electromagnetic servo motor ensures ±0.05% force accuracy at 5Hz operation.

Anatomical Simulation: 4-point bending fixture replicates physiological stress patterns (0°–90° angle adjustment).

Biorelevant Environment: 37±1°C saline bath with protein skimmer for in vitro corrosion testing.

AI-Powered Analytics: Machine learning identifies creep-fatigue interactions in real-time.

Regulatory Compliance: Pre-loaded YY/T 0856/ASTM F384 protocols with automated reporting.

Product Features

Electromagnetic Servo Actuator: 10 kN axial/5 Nm torsional capacity with programmable load ratios (R=0.1–10).

4-Point Bending Fixture: Self-aligning anvils accommodate fixator lengths (50–200 mm) and angles (0°–90°).

Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Chamber: 37±0.5°C recirculating saline bath with anti-evaporation design.

High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.

Safety Suite: Emergency stop, overload clutches, and leak detection system.

Accessories

Angular Fixator Fixture Kit:

Self-centering clamps (50–200 mm fixator compatibility)

Anatomical angle adapters (0°–90° adjustment)

Thermal-Mechanical Bath:

20L capacity with recirculating pump

Corrosion-resistant titanium interior

AngleFix Pro Software:

Automated stiffness degradation tracking and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–10 Nm)

Fixator alignment jigs (ASTM F384 compliant)

Calibration Bundle:

NIST-traceable force/torque calibration weights

Angular encoder verification tool

Safety Kit:

Leak detection system

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

Parameter	Specification
Max. Bending Force	±10.000 N (0.01 N resolution)
Max. Torsional Moment	±5 Nm (0.001 Nm resolution)
Frequency Range	0.1–30 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Bending Angle Range	0°–90° (0.1° resolution)
Saline Bath Temperature	37±0.5°C (PT1000 sensor)
Data Sampling Rate	10 kHz (synchronized across 8 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 1.800W
Dimensions (W×D×H)	600 × 500 × 800 mm
Weight	95 kg (net) / 110 kg (with bath)
Noise Level	<55 dB (A-weighted)

Другие товары поставщика

	Whole shoe breathability and heat preservation testing machine	Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athlet...
	Flame Durability Testing Machine,Continuous Burning Time Tester for Liquids,ISO 9038	Introduction When the hazardous liquid is heated to 0.5 ºC and 75 ºC, flame durability tester is used to evaluate the continuous burning...
	Circuit Integrity Under Fire Conditions Apparatus BS 6387，cable fire performance tester	Standard： BS 6387 Feature Control cabinet parameters: 1.With double flow meters and pressure regulators. 2.Automatic control of the testing pr...
	Aerosol Foams Flammability Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi...
	Glow Wire Test Machine, IEC 60695-2-10，automatic glow wire tester	Introduction: This machine is designedaccording to IEC60695-2-10: 2000 standard "glowing filament test method"todesign and produce. requirements a...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...