Bio-absorbable Internal Fixation Plates and Screws Test device

Standard

YY/T 0509-2009 (China): Specifies mechanical testing protocols for orthopedic plates/screws made of hydrolyzable polymers, including axial pull-out, torsion, and 4-point bending tests.

ASTM F2502-17 (International): Defines methodologies for evaluating the structural integrity of bioabsorbable fixation devices under physiological loading.

ISO 13779-4: Additional compliance for in vitro degradation testing of resorbable materials.

Product Advantages

Multi-Modal Testing: Single platform for axial pull-out, torsion, and 4-point bending tests.

Biodegradation Simulation: 37±1°C pH-controlled water bath with real-time conductivity monitoring.

High-Resolution Sensors: 0.001 N force/0.001 Nm torque resolution for fragile polymer testing.

Modular Fixturing: Self-centering clamps accommodate plates (20–100 mm) and screws (2.0–4.5 mm).

AI-Powered Analytics: Machine learning predicts degradation-induced strength loss over time.

Regulatory Compliance: Pre-loaded YY/T 0509/ASTM F2502 protocols with automated reporting.

Product Features

Electromagnetic Servo Actuator: 5 kN axial/1 Nm torsional capacity with programmable load ratios (R=0.1–10).

4-Point Bending Fixture: Anatomical curvature adapters replicate physiological stress patterns.

Dynamic pH Control: 37±1°C water bath with pH 5.5–8.0 adjustment for degradation studies.

High-Resolution Imaging: Built-in 5MP camera system for crack/corrosion analysis.

Safety Suite: Emergency stop, chemical-resistant enclosure, and leak detection.

Touchscreen Interface: Intuitive controls with pre-loaded ASTM/YY test sequences.

Accessories

Bioabsorbable Fixture Kit:

Self-centering plate clamps (20–100 mm compatibility)

Screw torque adapters (2.0–4.5 mm diameter)

pH-Controlled Water Bath:

15L capacity with recirculating pump

Corrosion-resistant titanium interior

BioTest Pro Software:

Automated degradation curve generation and strength retention analysis

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–1 Nm)

Implant alignment jigs (ASTM F2502 compliant)

Calibration Bundle:

NIST-traceable force/torque calibration weights

pH electrode calibration solution

Safety Kit:

Chemical-resistant gloves

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

Parameter	Specification
Max. Axial Force	±5.000 N (0.001 N resolution)
Max. Torsional Moment	±1 Nm (0.001 Nm resolution)
Bending Span	40–120 mm (1 mm increments)
pH Control Range	5.5–8.0 (0.1 resolution)
Temperature Control	37±1°C (PT1000 sensor)
Data Sampling Rate	10 kHz (synchronized across 8 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 1.200W
Dimensions (W×D×H)	500 × 450 × 750 mm
Weight	75 kg (net) / 90 kg (with bath)
Noise Level	<50 dB (A-weighted)

Другие товары поставщика

	OSU Rate of Heat Release Apparatus，Fire safety heat release tester for building materials	The OSU Rate of Heat Release Apparatus is a precision instrument designed to measure the heat release rate (HRR) of materials, primarily for aerosp...
	Catheter Mechanical Strength Measuring System	Product Introduction The Urinary Catheter Strength Tester is designed to determine the physical strength characteristics of urinary catheters, ser...
	Mask Air Tightness Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheAir TightnessTesterismainly used for air tightness testing of masks and respirators unde...
	Adiabatic Accelerated Calorimeter	Product Description Adiabatic Accelerated Calorimeter determines the thermal behavior of samples under adiabatic conditions by keeping the tempera...
	Nanofiber electrospinning device	The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easily produce nanofibers with diameters of 50 to 800 nm. This dev...

Все товары поставщика

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...