Gas Hazard Property Analyzer

• 

Product Introduction

This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mixtures composed of several pure flammable gases in proportion. It complies with GB 19521.3 - 2004 *Safety Specification for Inspection of Characteristics of Flammable Gas Dangerous Goods.

Standards

GB1952.3-2004

uISO10156：1996

uGB5085.4

uNY/T1860

Product Features

1. It adopts an embedded processor and the Windows CE operating system.

2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time. 3. The high - resolution photosensitive sensor has a short response time, ensuring that the gas can be captured instantly during flash - explosion and an inspection signal can be output. 4. It uses dual - channel digital flow meters. With high - precision gas flow control, it enables the precise mixing of the gas to be tested and air. 5. The instrument is equipped with an online gas - sampling channel, and the gas to be tested can be determined by gas chromatography - mass spectrometry (GC/MS) and other means. 6. Through a high - precision photosensitive sensor, the instrument can sense the light intensity in the reaction tube in real - time, automatically determine whether the gas at this concentration is flammable, and simultaneously give the combustion rate value. 7. During the test process, it can automatically determine the flammability and control the increase of gas concentration in steps. 8. The reaction chamber is equipped with double - layer tempered glass to protect the safety of experimenters. 9. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.

Technical parameters

Другие товары поставщика

	Bending Tester STD- FB2 - S	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rigid Plastics) SAE J2748 (Automotive Composite Flex...
	Battery Powder resistance tester	The Powder Resistivity Meter is a precision testing system designed to measure electrical resistivity, conductivity, and related properties of powd...
	Gravel Resistant Impact Tester/Stone chip tester，ISO 20567，automatic gravel impact tester	Application 1. Automotive Industry Vehicle Body Coating Testing: Testing the chip resistance of coatings on car chassis, doors, bumpers, etc., to...
	Mask respiratory resistance tester	Mask & Respirator Breathing Resistance Tester Respirator Breathing Resistance Tester is used to measure the respiratory resistance and expirat...
	Absorbable Bone - connecting Plates Four - point Bending Tester	Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...