Rubber Low-Temperature Brittleness Evaluation Machine

• 

Product Introduction:

Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according toGB/T 15256andGB/T5470standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.

Standards：

1. ISO812 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness

2. GB/T 15256 Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness

3. JIS-K-6261-2006 Rubber, vulcanized or thermoplastic - Determination of low temperature properties

4. ASTM D2137 Rubber property-Brittleness point of flexible polymers and coated fabrics

Technical parameter:

1. temperature control range: -80℃ (room temperature ≤25℃) (there are -60. -70. -80℃ three models for customers to choose)

2. cooling speed:

0 ℃ —— 1.2 ℃ —— 20 ℃ / min

- 20 ℃ —— 1.0 ℃ to 30 ℃ / min

- 30 ℃ —— 0.7 ℃ to 60 ℃ / min

-40℃——-60℃ about 0.7℃/min

-60℃——-80℃ About 0.5℃/min

Note: The use environment is used at room temperature (23-25 ℃)， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.

3. after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃

4. overall size: 900×505×800mm (length × width × height)

5. the overall size of the studio: 220×170×70mm (length × width × height)

6. cooling medium: ethanol or other non-freezing liquid

7. mixing motor: 15W

8. working power supply 220V——240V,50Hz,2kW

Другие товары поставщика

	Wet leakage current test system of photovoltaic module	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta...
	Leather thickness tester	Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f...
	Coatings Shear Fatigue Tester	Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc...
	Socks wear tester	The Socks Wear Tester is a specialized testing instrument designed to evaluate the wear resistance, durability, and comfort of socks material. By s...
	Syringe Sealing Positive Pressure Tester	The Syringe Sealing Positive Pressure Tester is a precision instrument designed to evaluate the tight-fitting performance of disposable syringes. I...

Похожие товары

	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...
	Flame retardant testing machine	Продавец: Qinsun Instruments Co., LTD	Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...