Non-combustibility Tester

• 

Product details

Non-combustible material refers to the material when it is heated by the fire even if it become the red or melting, which will not occur burning. Non-combustibility tester is designed by the new GB8624-2012 building materials fire classification requirements in the mandatory testing project , But also fully meet the GB / T 5464 and ISO 1182 international standards. Furnace temperature can quickly reach the temperature balance into the test program. The temperature curve is free to print.

Standards

GB/T 5464Method for non-combustibility test of building

ISO 1182Reaction to fire non-combustibility test of building products-non-combustibility test

BS 476-4Fire tests on building materials and structures-Full-scale room test for surface products

BS 476-11Method for assessing the heat emission from building materials

ASTM E 136Standard test method for behavior of materials in a vertical tube furnace at 750℃

Features

Patented design intelligent test system;

Stainless steel burner, beautiful and easy to clean up;

Heating furnace:Φ95mm ×Φ75mm × 150 mm;

3 mm × 0.2 m nickel 80% chromium 20% resistance band;

Equipped with airflow hood;

Thermocouple: Insulated nickel-chromium-nickel-aluminum armorΦ3mm /Φ0.3mm;

Power controller, control test power;

The experiment began to temperature equilibrium time of about 35min;

Thermometer: 0 ~ 1000℃± 5%.

Systems

High degree of automation, the test processissafe and reliable, easy to operate;

The use of high-quality bar heater, the furnace temperature can rise to 900℃;

Programmable controllers (PLCs) automate the heating process by using modern electronic devices,cangreatly extendthe life of the furnace;

PLC output signal control heating voltage is 0-110VAC. Eliminate the effect of voltage fluctuation on temperature;

PLC added solid state relay to achieve PID control heating;

Built-in new furnace temperature, calibration temperature, the normal test temperature three procedures;

Embedded integrated 7 "touch screen can be set to control the parameters set and display / experimental data acquisition and preservation / screen monitoring / real-time temperature curve display / historical curve and data query;

With sound alarm and alarm accident display function.

Другие товары поставщика

	Mechanical load testing machine for photovoltaic modules	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo...
	Medical Face Mask Synthetic Blood Penetration meter	Applicable Standards: GB 19083-2010 YY/T 0691-2008 YY 0469-2011 ISO 22609 ASTM F1862-07 Features: 1. Mask fixture is metal human head mold, ...
	Catheter Sliding Performance Tester	Standards YY/T 1536 - 2017 GB/T, ASTM, etc. Main Uses The catheter sliding performance tester is a precision instrument specifically designed t...
	Vacuum Ball - Disk Friction Tester	Standards ASTMD4172-94 ASTMD2266-91 SH/T0189-92 Main Purposes The vacuum ball - disk friction tester is a device specifically used for evaluat...
	Schopper Abrasion Tester	Standards DIN 53863, Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indu...

Похожие товары

	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...
	Flame retardant testing machine	Продавец: Qinsun Instruments Co., LTD	Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers...