UL1581 FCable Burning Test Chamber

• 

Introduction

Wire and cable horizontal vertical combustion tester is designed and manufactured according to UL1581. The tester is used to carry out 1060 vertical combustion and FT1 test , 1061 cable burning test, 1080VW-1 (vertical sample) combustion test, 1090 horizontal sample electric wire burning test and 1100 horizontal sample / FT2 combustion for the finished wire cable or cord, to assess the ability of a burning wire cable or cord to propagate a flame to a nearby flammable materials.

Application

The combustion tester can be used in horizontal vertical combustion of finished wire cables or cords to assess the tendency of a burning cable or cord to spread fire to the nearby flammable materials.

Standards

UL1581 sect 1060~1100Reference standards for safety for electrical wires, cables, flexible cords.

ASTM D 5025Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials.

ASTM D 5027

Features

1.Structure:

·Chamber is powder coated by electrolytic plate electrostatic spraying, beautiful appearance, anti-rust and anti-corrosion. The internal chamber is electrostaticsprayed with black powder.

·A strong exhaust ventilation device is set on the top of the chamber. When the test is completed, the ventilation device is opened together with the air supply system to emit exhaust to the outside; During the test process, this system shall be in a closed state.

·A tempered glass observation window sealed during the test process is set in the front of the chamber for the convenience to observe the test situation.

·Below the glass observation window, there is an operating hole, which is fitted with a sealed glove, and the operator wears the sealed glove to operate the burner.

2.Temperature measurement system:

·Thermal sensors (copper conduits and thermocouples) - The conduit structure should be copper cathodes with extremely high conductivity .at the length of 19.14 ± 0.02mm.

·Digital thermometer matches with the imported K-type thermocouple. Readings is higher than 1000 ° C.

·The whole test system is movable. Place the sample in the test chamber for the temperature measurement.

3.Test apparatus and test fixture:

·Main fixture: test holder and combustion burner.

·Flame height is easy to adjust. The total height of the gas flame is 125 ± 10mm, the blue inner flame height is 40 ± 2mm; the flame test angle is adjustable from 0 ~ 45.

·Special gas flowmeter plus imported needle valve precisely controls the gas flow.

·Brand pressure gauge and control valve; working gas pressure 69 ~ 138 Kpa.

·Air flow digital display.

·Test stand: made of stainless steel, independently horizontal holder and vertical holder, namely the three specifications of FT1. FT2. VW-1. The position of vertical holder and burner is parallel to the observation window, easy to observe and operate.

·High-voltage electronic automatic ignition system, and security protection system automatically cutting off the gas source.

·Wedged holder: increase wedge. The burner shall be installed on the wedge as per safety requirements , can be easily moved, and also can be accurately moved back to the specified location.

Другие товары поставщика

	Metal ring friction and wear testing machine	Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other par...
	Reciprocating Friction and Wear Testing Machine	Applicable Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to...
	Safety Footwear Compression Puncture Tester	Test purpose Measure the compression resistance of the shoe head cover and the puncture resistance of the steel plate to prevent the operator from...
	Torque - to - Failure Tester for Metal Bone - connecting Screws	Standard YY/T 0662-2008(Chinese standard for orthopedic implant testing) ISO 5832-1(Metallic materials for surgical implants – Wrought stai...
	Dry Sand Rubber Wheel Wear Tester	Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...

Похожие товары

	Custom Stainless Components for OEM Applications	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...