UL1581 FCable Burning Test Chamber

• 

Introduction

Wire and cable horizontal vertical combustion tester is designed and manufactured according to UL1581. The tester is used to carry out 1060 vertical combustion and FT1 test , 1061 cable burning test, 1080VW-1 (vertical sample) combustion test, 1090 horizontal sample electric wire burning test and 1100 horizontal sample / FT2 combustion for the finished wire cable or cord, to assess the ability of a burning wire cable or cord to propagate a flame to a nearby flammable materials.

Application

The combustion tester can be used in horizontal vertical combustion of finished wire cables or cords to assess the tendency of a burning cable or cord to spread fire to the nearby flammable materials.

Standards

UL1581 sect 1060~1100Reference standards for safety for electrical wires, cables, flexible cords.

ASTM D 5025Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials.

ASTM D 5027

Features

1.Structure:

·Chamber is powder coated by electrolytic plate electrostatic spraying, beautiful appearance, anti-rust and anti-corrosion. The internal chamber is electrostaticsprayed with black powder.

·A strong exhaust ventilation device is set on the top of the chamber. When the test is completed, the ventilation device is opened together with the air supply system to emit exhaust to the outside; During the test process, this system shall be in a closed state.

·A tempered glass observation window sealed during the test process is set in the front of the chamber for the convenience to observe the test situation.

·Below the glass observation window, there is an operating hole, which is fitted with a sealed glove, and the operator wears the sealed glove to operate the burner.

2.Temperature measurement system:

·Thermal sensors (copper conduits and thermocouples) - The conduit structure should be copper cathodes with extremely high conductivity .at the length of 19.14 ± 0.02mm.

·Digital thermometer matches with the imported K-type thermocouple. Readings is higher than 1000 ° C.

·The whole test system is movable. Place the sample in the test chamber for the temperature measurement.

3.Test apparatus and test fixture:

·Main fixture: test holder and combustion burner.

·Flame height is easy to adjust. The total height of the gas flame is 125 ± 10mm, the blue inner flame height is 40 ± 2mm; the flame test angle is adjustable from 0 ~ 45.

·Special gas flowmeter plus imported needle valve precisely controls the gas flow.

·Brand pressure gauge and control valve; working gas pressure 69 ~ 138 Kpa.

·Air flow digital display.

·Test stand: made of stainless steel, independently horizontal holder and vertical holder, namely the three specifications of FT1. FT2. VW-1. The position of vertical holder and burner is parallel to the observation window, easy to observe and operate.

·High-voltage electronic automatic ignition system, and security protection system automatically cutting off the gas source.

·Wedged holder: increase wedge. The burner shall be installed on the wedge as per safety requirements , can be easily moved, and also can be accurately moved back to the specified location.

Other supplier products

	Respirator Fit Tester	The Protective Mask Leak Tester is a portable device designed to detect the service performance and applicability of protective masks, and provide ...
	Safety shoe impact testing machine	According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344. ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 AS/NZS 22...
	perspiration fastness tester	Application Tests fabric color fastness against simulated sweat, seawater, saliva, and other liquids for quality control. Compliant Standards ISO 1...
	Leather thickness tester	Product Introduction Leather thickness tester is a special high-precision instrument for leather thickness measurement, which can be widely used f...
	Wire Cut - through Tester for Ford Automotive Wires	Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens...

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...