Building material burning performance tester

• 

Product details：

According to GB / T8626. ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.

Building material burning performance testing machine meet the standards: EN ISO 11925-2. DIN 53438. DIN4102-1. GB / T 8626 and other standards.

Technical parameters:

1. stainless steel structure box;

2. the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;

3. the flame height adjustable, automatic ignition;

4. the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;

5. gas pressure: 10KPa-50 KPa;

6. burning angle: 0 ° (vertical), 45 °

7. through the chassis outside the debug handle, the burner can move in the horizontal direction;

8. tempered glass door easy to observe the test;

9. stainless steel sample holder and sample template;

10. equipped with two kinds of stainless steel sample clip.Flame height gauge;

11. a high degree of experimental automation, experimental data accurate, easy to operate;

Control system:

1. programmable controller (PLC) control:

2. automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;

3. optional automatic detection of wind speed, 6 samples of experimental data preservation;

4. the text display display;

5. real-time monitoring of experimental data, query 6 experimental data, query the alarm content.

6. the experimental abnormal sound alarm.

Другие товары поставщика

	ROSS zigzag tester	Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di...
	Photovoltaic module damp heat test chamber	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu...
	Bone Plates Four-point Bending Fatigue Tester	Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigue properties of metallic bone plates, requiring 1 million ...
	Thermal Conductivity tester Of High Temperature Materials	Product details The high temperature thermal conductivity tester is a test instrument prepared according to GB / T17911-2006. YB / T 4130-2005 sta...
	Metal Bone Screws Torque Tester	Standard YY/T 1506. ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ...

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...