Building material burning performance tester

• 

Product details：

According to GB / T8626. ISO11925 development, suitable for the absence of external radiation conditions, with a small flame directly impact the vertical placement of the sample to determine the flammability of building products.Applicable to category B, C, D, E, Bfl, Cfl, Dfl and Efl related to building material testing, the unit provides a comprehensive solution for ease of use by the operator.

Building material burning performance testing machine meet the standards: EN ISO 11925-2. DIN 53438. DIN4102-1. GB / T 8626 and other standards.

Technical parameters:

1. stainless steel structure box;

2. the inlet burner diameter Φ0.17mm, there are four Φ4 mm air conditioning holes;

3. the flame height adjustable, automatic ignition;

4. the flame application time and fuel time can be 0 to 99 minutes and 99 seconds to adjust;

5. gas pressure: 10KPa-50 KPa;

6. burning angle: 0 ° (vertical), 45 °

7. through the chassis outside the debug handle, the burner can move in the horizontal direction;

8. tempered glass door easy to observe the test;

9. stainless steel sample holder and sample template;

10. equipped with two kinds of stainless steel sample clip.Flame height gauge;

11. a high degree of experimental automation, experimental data accurate, easy to operate;

Control system:

1. programmable controller (PLC) control:

2. automatic timing, automatic detection of flame, automatic ignition, ignition abnormal protection;

3. optional automatic detection of wind speed, 6 samples of experimental data preservation;

4. the text display display;

5. real-time monitoring of experimental data, query 6 experimental data, query the alarm content.

6. the experimental abnormal sound alarm.

Other supplier products

	Water injection counterweight dummy	This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water or solid filler, and ca...
	Haze and Transmittance Meter	Applicable standards: GBT 2410-2008: Determination of light transmittance and fog degree of transparent plastics. This is the national standard of...
	Bone Screw Pull-out Tester	Standard YY/T 1504, ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f...
	Geosynthetic Transmissivity Tester	Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
	Metallic Cables and Wire Ropes Mechanical Property Testing Machine	Standard YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue stren...

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...