Titanium carbide hard alloy guide wheel - Customized version
这种硬质合金碳化钛导轮具有优异的抗热冲击性能。即使温度从室温骤升至300℃，再骤降至室温，也不会发生开裂，因此适用于间歇性生产环境。导轮尺寸范围广，直径从50mm到500mm，宽度从10mm到100mm，可适配不同类型的拉丝或轧制设备。在光纤和光缆生产中，它可以精确引导光纤，使光纤衰减率保持在0.2dB/km以下，从而保证通信质量。硬质合金碳化钛导轮是线材和管材生产中的关键导向部件。它们采用高纯度碳化钛和钴粘结相粉末冶金烧结工艺制成，表面硬度高达HRC88，耐磨性是钢制导轮的50倍以上。圆度误差控制在0.002mm以内，确保高速拉丝（最高可达100m/s）过程中钢丝运行平稳，避免抖动或偏移。在不锈钢丝生产中，使用该导轮可将钢丝表面粗糙度从Ra1.6μm降低至Ra0.4μm，显著提高产品质量。
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Impact-resistant, wear-resistant and high-strength titanium carbide rods | Compared with traditional high-speed steel bars, hard alloy titanium carbide round bars offer a cutting speed that can be increased by three to fiv... |
 |
Titanium carbide guide wheels resistant to high-frequency friction | Hard alloy titanium carbide guide wheels have excellent impact resistance. When the wire is suddenly tensioned or broken, they are not prone to cra... |
 |
Factory direct supply high hardness steel rolling special carbide guide wheel & roller | Guide wheels, also known as guide rolls or guide wheels, are an important part of bar and wire rod rolling equipment in the iron and steel indust... |
 |
Ultrafine-grained titanium carbide round rods | The anti-adhesion performance of titanium carbide round rods made of hard alloy is outstanding. When processing sticky materials such as aluminum a... |
 |
Surface finish Ra≤0.2μm Titanium carbide alloy bar | Titanium carbide alloy bar is an alloy bar with titanium carbide as the main component, combining high hardness, wear-resistant properties, good ... |
