Titanium carbide hard alloy guide wheel - Customized version
这种硬质合金碳化钛导轮具有优异的抗热冲击性能。即使温度从室温骤升至300℃，再骤降至室温，也不会发生开裂，因此适用于间歇性生产环境。导轮尺寸范围广，直径从50mm到500mm，宽度从10mm到100mm，可适配不同类型的拉丝或轧制设备。在光纤和光缆生产中，它可以精确引导光纤，使光纤衰减率保持在0.2dB/km以下，从而保证通信质量。硬质合金碳化钛导轮是线材和管材生产中的关键导向部件。它们采用高纯度碳化钛和钴粘结相粉末冶金烧结工艺制成，表面硬度高达HRC88，耐磨性是钢制导轮的50倍以上。圆度误差控制在0.002mm以内，确保高速拉丝（最高可达100m/s）过程中钢丝运行平稳，避免抖动或偏移。在不锈钢丝生产中，使用该导轮可将钢丝表面粗糙度从Ra1.6μm降低至Ra0.4μm，显著提高产品质量。
Send product request
Other supplier products
 |
Milling cutter rod carbide round bar | Titanium carbide round bar, also known as TiC bar, is a kind of metal-ceramic bar with steel as the binding phase and titanium carbide as the har... |
 |
Ultrafine-grained chromium carbide powder | This powder has good chemical stability. At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated ni... |
 |
Titanium carbide round rods for microdrilling tools | The production process of this round bar is extremely rigorous, from the control of the purity of the titanium carbide powder (purity ≥ 99.5%)... |
 |
Titanium carbide guide wheels that reduce material loss by 10% | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Titanium Carbide Guide Wheels for Increased Productivity | Titanium carbide guide wheel is made of high hardness titanium carbide material, with excellent wear resistance, high temperature resistance and ch... |
