Titanium carbide hard rods - special for extrusion dies
Hard alloy titanium carbide round rods can be tailored to achieve specific performance characteristics by adjusting the titanium carbide content (typically 70%–90%) and the binder proportion. Higher titanium carbide content enhances wear resistance, making the material suitable for rough machining applications, while an increased binder ratio improves toughness, rendering it more appropriate for precision machining. With a density of only 6.5 g/cm³, these rods are approximately 20% lighter than tungsten carbide counterparts of comparable dimensions, which makes them ideal for lightweight tooling solutions. In the 3C electronics industry, they are widely employed in the machining of high-precision components such as mobile frames and laptop housings, ensuring scratch-free surfaces and minimal dimensional deviations. The rod length is customizable, ranging from 100 mm to 1000 mm, and the material is amenable to secondary processing techniques—including precision grinding and wire cutting—enabling the production of complex geometries. Although the initial cost exceeds that of conventional cemented carbide, the extended service life and superior processing efficiency result in a lower unit production cost over time. In gear manufacturing, hobs fabricated from this material can achieve gear tooth surface accuracy of grade 6 or higher, fulfilling the stringent requirements of advanced mechanical transmission systems.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Processing of cable insulation layer titanium carbide hard alloy guide wheels | The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
 |
99.5% high-purity chromium carbide powder | Chromium carbide powder has excellent wetting properties and is firmly bonded to metal substrates such as iron, nickel, and cobalt. The coating is ... |
 |
Titanium carbide round rods for special requirements | Tungsten carbide titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard pha... |
 |
Chromium carbide powder for petroleum machinery | Chromium carbide powder is silver gray in color and is an important metal-ceramic material with the chemical formula Cr₃C₂. It has high hardness ... |
 |
Titanium carbide hard alloy guide wheel with strong load-bearing capacity | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
Похожие товары
 |
3D printing spherical titanium carbide powder | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | Продавец: Zhuzhou Hastion High-Tech Materials Co.,Ltd. | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
