Titanium carbide hard rods - special for extrusion dies
Hard alloy titanium carbide round rods can be tailored to achieve specific performance characteristics by adjusting the titanium carbide content (typically 70%–90%) and the binder proportion. Higher titanium carbide content enhances wear resistance, making the material suitable for rough machining applications, while an increased binder ratio improves toughness, rendering it more appropriate for precision machining. With a density of only 6.5 g/cm³, these rods are approximately 20% lighter than tungsten carbide counterparts of comparable dimensions, which makes them ideal for lightweight tooling solutions. In the 3C electronics industry, they are widely employed in the machining of high-precision components such as mobile frames and laptop housings, ensuring scratch-free surfaces and minimal dimensional deviations. The rod length is customizable, ranging from 100 mm to 1000 mm, and the material is amenable to secondary processing techniques—including precision grinding and wire cutting—enabling the production of complex geometries. Although the initial cost exceeds that of conventional cemented carbide, the extended service life and superior processing efficiency result in a lower unit production cost over time. In gear manufacturing, hobs fabricated from this material can achieve gear tooth surface accuracy of grade 6 or higher, fulfilling the stringent requirements of advanced mechanical transmission systems.
Send product request
Other supplier products
 |
Chromium carbide powder with customised particle size | Chromium carbide powder is grey-black in colour, with high hardness, excellent abrasion resistance, high temperature and chemical corrosion resis... |
 |
Titanium carbide hard rods - materials for hardware manufacturing | The length of this round bar can be customized according to specific requirements, ranging from 100 mm to 1000 mm, and it is amenable to secondary ... |
 |
Titanium carbide rods in stock can be cut as needed | Compared with traditional high-speed steel bars, the cutting speed achievable with titanium carbide hard alloy round bars can be increased by 3 to ... |
 |
Chromium carbide powder with excellent fluidity | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
 |
Vacuum sintered carbide round rods | Titanium carbide carbide round bar is a composite material with steel as the base phase and refractory metal carbide such as titanium carbide as th... |
