Titanium carbide guide wheel - for industrial use
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Titanium carbide powder with good sintering activity | After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composi... |
 |
Wear-resistant titanium carbide hard guide wheel | Hard alloy titanium carbide guide wheels have excellent impact resistance. When the wire is suddenly tensioned or broken, they are not prone to cra... |
 |
Large-scale production of chromium carbide powder for cost reduction | Chromium carbide powder is often irregular grayish-black particles with a particle size of 10-40μm, a purity of ≥98%, and a free carbon conte... |
 |
Widely used in cutting tools/molds/shaft parts Carbide rods | titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard phase and cobalt or ... |
 |
Chromium carbide powder perfectly combined with nickel/cobalt-based alloys | The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder pr... |
