Titanium carbide guide wheel - for industrial use
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. Compared with ceramic guide wheels, this type of guide wheel has better toughness and is less likely to break due to minor collisions, reducing the frequency of replacement. Its service life is 2 to 3 times that of ceramic guide wheels. In the production of steel cord, a set of guide wheels can produce over 1,000 tons of cord, while ceramic guide wheels can only produce 300 to 500 tons. The cost-performance advantage of guide wheels has enabled them to be widely used in the tire industry, helping to enhance the wear resistance and safety of tires.
在线联系供应商
Other supplier products
 |
Titanium carbide hard rods - for mechanical seals | The production process of this round bar is extremely strict, from the purity control of titanium carbide powder (purity ≥99.5%) to the precise ... |
 |
The hard alloy guide wheel is made of titanium carbide | This type of guide wheel can be customized with various groove profiles tailored to the specific dimensions and types of wire or pipe, including V-... |
 |
Customized processing of long titanium carbide rods | Hard alloy titanium carbide round rods, as a critical material in high-end manufacturing, exhibit exceptional corrosion resistance, maintaining str... |
 |
Spherical chromium carbide powder | This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The pa... |
 |
Wear-resistant titanium carbide rods extend service life | The length of this round bar can be customized according to requirements, ranging from 100mm to 1000mm, and it can undergo secondary processing suc... |
