Titanium carbide hard alloy guide wheel - high hardness
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. The dynamic balance accuracy of the guide wheel reaches G0.4 grade. When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface. In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Titanium carbide guide wheels with smooth operation and low vibration | Hard alloy titanium carbide guide wheels exhibit excellent impact resistance. They are less likely to crack or deform when the wire is suddenly ten... |
 |
The core component of cold working dies is titanium carbide round bars | Hard alloy titanium carbide round rods can be customized into products with different properties by adjusting the titanium carbide content (usually... |
 |
Wear-resistant alloy chromium carbide powder | Chromium carbide powder is silver grey in colour and is an important metal-ceramic material with the chemical formula Cr₃C₂. It has high hardness... |
 |
Low friction design guide wheel | Titanium carbide guide wheel is a high-performance transmission component made of titanium carbide as the core material. It is extremely high hardn... |
 |
Ultra-fine grain tantinium carbide round rods | The TiC titanium carbide rod/bars is mainly used for Hammer head, jaw plate, concave, mantle, alloy ball, plate hammer wear part,machine equipment ... |
