Titanium carbide hard alloy guide wheel - high hardness
Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality. The dynamic balance accuracy of the guide wheel reaches G0.4 grade. When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface. In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
Send product request
Other supplier products
 |
Uniform titanium carbide powder in particle size | This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/... |
 |
Copper tube rolling carbide guide wheel | Carbide titanium carbide guide wheel is the key guiding parts in the production of wire and pipe, which is made of high purity titanium carbide and... |
 |
Carbide guide rollers for wire and cable production | Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, witho... |
 |
High molding precision titanium carbide powder | Titanium carbide powder is a kind of gray-black ultra-fine powder, the purity can be up to 99.9% or more, the average particle size between 0.5-5... |
 |
Low-carbon and environmentally friendly titanium carbide hard alloy rods | The production process of this titanium carbide round bar is strictly controlled, ranging from the selection of high-purity raw materials (titanium... |
