Special for titanium carbide hard guide wheel transmission
The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance can be further enhanced by 30%, making it suitable for processing high-hardness alloy wires. Its weight is 30% lighter than that of steel guide wheels of the same size, which can reduce the load on the drive motor and lower energy consumption by more than 15%. In the production of precision tubes, the groove accuracy of the guide wheel reaches IT3 grade, which can ensure that the outer diameter tolerance of the tube is controlled within ±0.01mm, meeting the high-precision requirements of the medical, aviation and other fields. The dynamic balance accuracy of the guide wheel reaches G0.4 grade. When rotating at high speed, the vibration amplitude is less than 0.01mm, which can reduce the vibration noise of the equipment and improve the working environment in the workshop. It has good chemical stability and will not undergo chemical reactions with metal wires, thus avoiding contamination or discoloration on the wire surface. In the production of precious metal wires (such as gold and silver wires), the clean surface of the guide wheel can prevent the loss of precious metals and reduce production costs.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Industrial guide wheels - titanium carbide hard material | The titanium carbide hard alloy guide wheel exhibits outstanding thermal shock resistance, maintaining structural integrity without cracking during... |
 |
Mechanical wear-resistant alloy round bar | Titanium carbide carbide round bar is a composite material with steel as the base phase and refractory metal carbide such as titanium carbide as ... |
 |
Titanium carbide powder for modifying high-temperature alloys | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with particle size controlled within 0.5 - 5 μm, and a density of 6.68 g... |
 |
Chromium carbide powder with uniform microstructure | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
 |
Titanium carbide hard alloy rods for hardware tool materials | Compared with traditional high-speed steel bars, hard alloy titanium carbide round bars allow for a cutting speed that is 3 to 5 times higher, sign... |
