Heat exchanger part aluminum cooling fins turbulator

1. Product description
In the study of heat transfer, fins are surfaces that extend from an object to increase the rate of heat transfer to or from the environment by increasing convection. The amount of conduction, convection, or radiation of an object determines the amount of heat it transfers. Increasing the temperature gradient between the object and the environment, increasing the convection heat transfer coefficient, or increasing the surface area of the object increases the heat transfer. Sometimes it is not feasible or economical to change the first two options. Thus, adding a fin to an object, increases the surface area and can sometimes be an economical solution to heat transfer problems.
Because fins are used to improve heat transfer, it is important to allow open spaces toward optimization. In other words, the shape of fins must be optimized such that the heat transfer density is maximized when the space and the materials used for the finned surfaces are constraints
Fins are most commonly used in heat exchanging devices such as radiators in cars, computer CPU heatsinks, and heat exchangers in power plants. They are also used in newer technology such as hydrogen fuel cells. Nature has also taken advantage of the phenomena of fins. The ears of jackrabbits and fennec foxes act as fins to release heat from the blood that flows through them.
2. Specification
2.1. Material: Aluminum alloy like AA3003,AA1070,AA6061,etc are typical used;
2.2. Temper for aluminum alloy: H14,H16,O are typical;
2.3. Fins type
Plain,serrated,perforated,wavy,louvered type is typical
2.4. Dimension
Width up to 300mm; Thickness from 0.1mm to 0.5mm; Height up to 50mm; FPI from 6 to 12;
3. Surface finish
Mill finish and cleaning
4. Packing way
To be packed in plywood case with protection film
5. Application
Typically used as parts for heat exchanger

Другие товары поставщика

	High thermal performance liquid cooling plate	1. Product description Liquid cooling plates are a device that provide localized cooling of power electronics by transferring heat from the device ...
	Typical brazing material AA3003 aluminum sheet coil	1. Specification 1.1. Material AA303 alloy; 1.2. Temper: O,H14,H16 is typical; 1.3. Dimension Width from 450mm to 1300mm, Thickness from 0.08mm to ...
	Heat exchanger part aluminum side bar	1. Specification 1.1. Material: Appropriate aluminum alloys like AA3003,AA6061,6063,etc. 1.2. Temper: H112 is typical 1.3. Dimension Length up to 6...
	Heat exchanger material aluminum cladding sheet coil	1. Product description Cladded aluminum material is suitable for a variety of brazing processes,such as Nocolok brazing and vacuum brazing. It's w...
	Heat exchanger part aluminum cooling fins turbulator	1. Product description In the study of heat transfer, fins are surfaces that extend from an object to increase the rate of heat transfer to or fro...

Похожие товары

	Litian Rock Tools	Продавец: Litian Heavy Industry Machinery Co., Ltd	We are a Chinese manufacturer of mining drilling toolsfor drill & blast and rock excavation i...
	Small Square Tube	Продавец: Zhejiang Enhua New Material Technology Co., Ltd	Aluminum square tubes are hollow pieces of aluminum with square cross-sections. They are commonly...
	Ролики покрыты крашеным алюминием, алюминиевая магния марганца, старая металлическая ватта	Продавец: Компания хэнань по производству новых материалов
	Ролики покрыты крашеным алюминием, алюминиевая магния марганца, старая металлическая ватта	Продавец: Компания хэнань по производству новых материалов	Ролики покрыты крашеным алюминием, алюминиевая магния марганца, старая металлическая ватта
	Heat exchanger part aluminum cooling fins turbulator	Продавец: NANJING METALLI INDUSTRIAL CO., LIMITED	1. Product description In the study of heat transfer, fins are surfaces that extend from an obje...