China Hot Rolled Structural Steel and H Beams

Standards: GB/ASTM/SS400/ST52

Material: Q195 Q235 Q345

Web Thickness: 10mm

Web Width: 150mm

Flange Thickness: 7mm

Flange Width: 150mm

Length: 12m

Technology: Hot rolled

Surface treatment: Black

Application: construction/welding /green house or water system

Details:

Container type: 20gp/gh or 40gp/gh

Loading capability: 25-27ton each container

Package type: Plastic caps on both ends, Steel bundle, Woven bag or according to customers' request

Payment terms:30%TT advanced and balanced pay before loading

Factory production ability: 10000ton monthly

Delivery time: within 15-20days

Loading port: TIANJIN port

China Hot Rolled Structural Steel and

H Beams is an economical section and efficient section with more optimized cross-sectional area allocation and more reasonable weight-to-weight ratio. It is named because its section is the same as the English letter "H". Because all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.

H-beam is a new type of economic construction steel. Theshape of the H Beamssection is economical and reasonable, and the mechanical properties are good. The points on the section are evenly extended and the internal stress is small during rolling. Compared with ordinary I-beams, it has the advantages of large section modulus, light weight, and metal saving. The structure is reduced by 30-40%; and because the inside and outside of the legs are parallel, and the leg ends are at right angles, the assembly and assembly into components can save welding and riveting workload by up to 25%. It is often used in large buildings (such as factory buildings, high-rise buildings, etc.) that require large load-bearing capacity and good cross-section stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports, and foundation piles.

H-beamsare economical cross-section steel with better cross-section mechanical properties, which is optimized and developed from I-beams. In particular, the cross-section is named after the English letter "H".

Characteristics are as follows:

7. , and honeycomb beams can be combined to form various cross-section forms, which greatly meets engineering design and production requirements.
8. can be customized.

Classificationof H-beams：

There are two types of hot-rolled H-beams and welded H-beams (H). are divided into wide flange H-beams (HW), middle flange H-beams (HM) and narrow flange H-beams (HN) .

Applicationof H-beams：

H-beam is economical section steel, widely used in industry, construction, bridges, oil rigs, etc. It is predicted that the demand for H-beam in China in 2005 was about 2.5 million tons, and the demand in 2010 was 5 million tons. The annual production capacity of H-beam is 1.2 million tons, and the market demand is huge.

Features of :

Compared with I-beam, the section modulus is large, and the metal can be saved by 10-15% when the load bearing conditions are the same.

With the same beam height, the steel structure can be 50% larger than the concrete structure, making the building layout more flexible.

Compared with the self-weight of the concrete structure, the self-weight of the structure is reduced, and the internal force of the structural design is reduced, which can reduce the requirements for the foundation treatment of the building structure, facilitate the construction, and reduce the cost.

Hot-rolled H-beam steel structure has a scientific and reasonable structure, good plasticity and flexibility, and high structural stability. It is suitable for building structures that can withstand large vibration and shock loads and has a strong resistance to natural disasters. Building structure in the earthquake zone. According to statistics, in the world's magnitude 7 or more devastating earthquake disasters, H Beams-based steel structures have suffered the least damage.

Compared with the concrete structure, the cross-sectional area of the steel structure column is small, which can increase the effective use area of the building. Depending on the form of the building, it can increase the effective use area by 4-6%.

Compared with welding H Beams, it can obviously save labor and materials, reduce the consumption of raw materials, energy and labor, low residual stress, good appearance and surface quality.

Easy to connect and install, easy to remove and reuse.

The use of H Beamscan effectively protect the environment, which is specifically manifested in three aspects: first, compared with concrete, dry construction can be used, which generates less noise and less dust; second, due to the reduction of its own weight, the amount of soil taken for foundation construction is small, and Small damage to land resources, in addition to reducing the amount of concrete, reducing the amount of rock excavation in the mountains, is conducive to the protection of the ecological environment; Third, after the service life of the building structure expires, the amount of solid waste generated after the structure is demolished is small, and the value of scrap steel resources is high.

Hot-rolled H-beam-based steel structures have a high degree of industrial production, which is convenient for machine manufacturing, intensive production, high accuracy, easy installation, and easy quality assurance. It can be built into a real house manufacturing factory, bridge manufacturing factory, and industrial workshop manufacturing factory. The development of steel structures has created and driven the development of hundreds of emerging industries.

It has a small footprint and is suitable for all-weather construction, and is less affected by climatic conditions. The construction speed of a steel structure made of hot-rolled H Beamsis about 2-3 times the construction speed of a concrete structure, the capital turnover rate is doubled, the financial cost is reduced, and the investment is saved. Taking China's "Tallest Building" Shanghai Pudong's "Jinmao Tower" as an example, the structural main body with a height of nearly 400m has completed the structural cap in less than half a year, while the steel-concrete structure requires a two-year construction period.

We provide theseh-Beams, if you have any questions, please contact us on time!

Classification of H-beams：

There are two types of hot-rolled H-beams and weldedH-beams(H). Hot-rolled H-beams are divided into wide flange H-beams (HW), middle flange H-beams (HM) and narrow flange H-beams (HN) .

company website:

Application of H-beams：

H-beamis an economical section steel, widely used in industry, construction, bridges, oil rigs, etc. It is predicted that the demand for H-beams in China in 2005 was about 2.5 million tons, and the demand in 2010 was 5 million tons. The annual production capacity of H-beam is 1.2 million tons, and the market demand is huge.

HGB Industrial Groupmainly produce and export Steel Strip Coils, with width from 30mm to 900mm, and thickness from 0.12mm to 4.0mm, annual output about 1,000,000 metric tons. We also have 8 lines for Square and Rectangle Steel Tubes production, with sizes from 20×20mm to 50×100mm, and thickness from 0.7mm to 2.75mm, annual output about 800,000 metric tons. Over 600 staffs here welcome your visit to our factory，and ready to service for your business.If you have any questions, please clickhereto ！

Другие товары поставщика

	Cold Rolled Rectangular Steel Tube	Product name:Carbon low-steel wire in Rodcabbage of steel thickness 3.5 mm Key words: steel wire rod Standards: GB Material: Q195 Size: 3.5mm Ty...
	China Hot Rolled Structural Steel and H Beams	Standards: GB/ASTM/SS400/ST52 Material: Q195 Q235 Q345 Web Thickness: 10mm Web Width: 150mm Flange Thickness: 7mm Flange Width: 150mm Length: 12m T...
	Pre Galvanized Square Tubes	Grade: Q195 Size: 25mmx25mm Wall Thickness: 0.8mm Length: 5.8m Shape: Square HGB Industrial Group is an enterprise company, including (Hongkong)...
	Carbon Steel Flat Bar From Factory Directly	Grade: Q235 Thickness: 1.8mm Width: 100mm Length: 6m Application: Construction, shipbuilding, communication tower, steel grating etc Relat...
	Rectangular Mild Steel Tube	Grade: ASTM A500 Size: 20mmx10mm Thickness: 0.9mm Length: 5.8m HGB Industrial Group is an enterprise company, including (Hongkong) HGB Company L...

Все товары поставщика

Похожие товары

	SCC L8013Cr 2-7/8" EUE Tubing Coupling SSC	Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD	Introduction Copper plated coupling are short lengths of pipe used to connect 2 joints of casing...
	Special Clearance 1.9" N80 NUE Tubing Coupling	Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD	Introduction NUE Thread Couplings are short lengths of pipe used to connect 2 joints of tubing.T...
	DS55/HT55/HST55 4145h Crossover	Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD	Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
	X-over 3-7/8"CAS 2Cr13 Crossover	Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD	Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...
	JFE BEAR Thread Type Super 13Cr Crossover	Продавец: Тяньцзинь Wenxin Energy Technology Co.,LTD	Introduction Crossover is a tubing or casing for connecting two different sizes, threads and wei...