China Hot Rolled Structural Steel and H Beams
Standards: GB/ASTM/SS400/ST52
Material: Q195 Q235 Q345
Web Thickness: 10mm
Web Width: 150mm
Flange Thickness: 7mm
Flange Width: 150mm
Length: 12m
Technology: Hot rolled
Surface treatment: Black
Application: construction/welding /green house or water system
Details:
Container type: 20gp/gh or 40gp/gh
Loading capability: 25-27ton each container
Package type: Plastic caps on both ends, Steel bundle, Woven bag or according to customers' request
Payment terms:30%TT advanced and balanced pay before loading
Factory production ability: 10000ton monthly
Delivery time: within 15-20days
Loading port: TIANJIN port
China Hot Rolled Structural Steel and
H Beams is an economical section and efficient section with more optimized cross-sectional area allocation and more reasonable weight-to-weight ratio. It is named because its section is the same as the English letter "H". Because all parts of the H-beam are arranged at right angles, the H-beam has the advantages of strong bending resistance, simple construction, cost saving and light weight in all directions, and has been widely used.
H-beam is a new type of economic construction steel. Theshape of the H Beamssection is economical and reasonable, and the mechanical properties are good. The points on the section are evenly extended and the internal stress is small during rolling. Compared with ordinary I-beams, it has the advantages of large section modulus, light weight, and metal saving. The structure is reduced by 30-40%; and because the inside and outside of the legs are parallel, and the leg ends are at right angles, the assembly and assembly into components can save welding and riveting workload by up to 25%. It is often used in large buildings (such as factory buildings, high-rise buildings, etc.) that require large load-bearing capacity and good cross-section stability, as well as bridges, ships, lifting and transportation machinery, equipment foundations, supports, and foundation piles.
H-beamsare economical cross-section steel with better cross-section mechanical properties, which is optimized and developed from I-beams. In particular, the cross-section is named after the English letter "H".
Characteristics are as follows:
- , and honeycomb beams can be combined to form various cross-section forms, which greatly meets engineering design and production requirements.
- can be customized.
Classificationof H-beams：
There are two types of hot-rolled H-beams and welded H-beams (H). are divided into wide flange H-beams (HW), middle flange H-beams (HM) and narrow flange H-beams (HN) .
Applicationof H-beams：
H-beam is economical section steel, widely used in industry, construction, bridges, oil rigs, etc. It is predicted that the demand for H-beam in China in 2005 was about 2.5 million tons, and the demand in 2010 was 5 million tons. The annual production capacity of H-beam is 1.2 million tons, and the market demand is huge.
Features of :
Compared with I-beam, the section modulus is large, and the metal can be saved by 10-15% when the load bearing conditions are the same.
With the same beam height, the steel structure can be 50% larger than the concrete structure, making the building layout more flexible.
Compared with the self-weight of the concrete structure, the self-weight of the structure is reduced, and the internal force of the structural design is reduced, which can reduce the requirements for the foundation treatment of the building structure, facilitate the construction, and reduce the cost.
Hot-rolled H-beam steel structure has a scientific and reasonable structure, good plasticity and flexibility, and high structural stability. It is suitable for building structures that can withstand large vibration and shock loads and has a strong resistance to natural disasters. Building structure in the earthquake zone. According to statistics, in the world's magnitude 7 or more devastating earthquake disasters, H Beams-based steel structures have suffered the least damage.
Compared with the concrete structure, the cross-sectional area of the steel structure column is small, which can increase the effective use area of the building. Depending on the form of the building, it can increase the effective use area by 4-6%.
Compared with welding H Beams, it can obviously save labor and materials, reduce the consumption of raw materials, energy and labor, low residual stress, good appearance and surface quality.
Easy to connect and install, easy to remove and reuse.
The use of H Beamscan effectively protect the environment, which is specifically manifested in three aspects: first, compared with concrete, dry construction can be used, which generates less noise and less dust; second, due to the reduction of its own weight, the amount of soil taken for foundation construction is small, and Small damage to land resources, in addition to reducing the amount of concrete, reducing the amount of rock excavation in the mountains, is conducive to the protection of the ecological environment; Third, after the service life of the building structure expires, the amount of solid waste generated after the structure is demolished is small, and the value of scrap steel resources is high.
Hot-rolled H-beam-based steel structures have a high degree of industrial production, which is convenient for machine manufacturing, intensive production, high accuracy, easy installation, and easy quality assurance. It can be built into a real house manufacturing factory, bridge manufacturing factory, and industrial workshop manufacturing factory. The development of steel structures has created and driven the development of hundreds of emerging industries.
It has a small footprint and is suitable for all-weather construction, and is less affected by climatic conditions. The construction speed of a steel structure made of hot-rolled H Beamsis about 2-3 times the construction speed of a concrete structure, the capital turnover rate is doubled, the financial cost is reduced, and the investment is saved. Taking China's "Tallest Building" Shanghai Pudong's "Jinmao Tower" as an example, the structural main body with a height of nearly 400m has completed the structural cap in less than half a year, while the steel-concrete structure requires a two-year construction period.
We provide theseh-Beams, if you have any questions, please contact us on time!
Classification of H-beams：
There are two types of hot-rolled H-beams and weldedH-beams(H). Hot-rolled H-beams are divided into wide flange H-beams (HW), middle flange H-beams (HM) and narrow flange H-beams (HN) .
company website:
Application of H-beams：
H-beamis an economical section steel, widely used in industry, construction, bridges, oil rigs, etc. It is predicted that the demand for H-beams in China in 2005 was about 2.5 million tons, and the demand in 2010 was 5 million tons. The annual production capacity of H-beam is 1.2 million tons, and the market demand is huge.
HGB Industrial Groupmainly produce and export Steel Strip Coils, with width from 30mm to 900mm, and thickness from 0.12mm to 4.0mm, annual output about 1,000,000 metric tons. We also have 8 lines for Square and Rectangle Steel Tubes production, with sizes from 20×20mm to 50×100mm, and thickness from 0.7mm to 2.75mm, annual output about 800,000 metric tons. Over 600 staffs here welcome your visit to our factory，and ready to service for your business.If you have any questions, please clickhereto ！
Send product request
Other supplier products
 |
Galvanized Steel Angle Bar | Material: Q195 Size: 10mm Length: 12m Related Sizes: Material: HRB400(E), HRB500(E)/GR40, GR60, GR75/460B, 500B/300E, 500E/SD345, SD390, SD490/G... |
 |
Hot rolled steel channel european standard U channel for construction use | Product name:Hot rolled steel channel european standardU channelfor construction use Key words:hot rolled steel u channel Standards: GB Ma... |
 |
Hot Rolled Black Rectangle Tubes | Product name:building materials Q235Hot Rolled Black Rectangle Mild Steel Tube Key words: hot rolled black rectangular steel tube Standards: GB/... |
 |
Hot Rolled Steel Coil | Product name:Hot rolled carbon steel plate stripswidth 164mm thickness 2.5mm Key words: Hot rolled carbon steel strips Standards: GB/ASTM/SS400/... |
 |
Hot Rolled Steel Rectangular Tube | Product name:Chinese factory hot rolled steel round pipe for scaffolding Key words: Steel round pipe for scaffolding Standards: GB Material: Q19... |
Same products
 |
Spring Support And Hanger | Seller: Cangzhou Zhiang Pipeline Equipment Manufacturing Co., Ltd | Spring Support And Hangeris an important industrial equipment, used to support and hang pipe, con... |
 |
Plain Steel Mesh | Seller: Hebei Jiushen Wire Weaving Co., Ltd | Plain steel wire meshis a kind of wire mesh that woven from various kinds of carbon steel wires. ... |
 |
Black Annealed Wire | Seller: Hebei Shineyond Metal Products Co.,Ltd | The black annealed wireis black iron wire drawn from Q195 type wire rod. After selecting the raw ... |
 |
U71MN QU70 Crane Rail | Seller: Hebei Yongyang Special Steel Group Co., Ltd | YONGYANG Railcan supply all kinds of steel rails, including light rail, heavy rail, crane rail, l... |
 |
P43 Steel Rail Supplier China | Seller: Hebei Yongyang Special Steel Group Co., Ltd | P43 railis also called 43kg rail, which is the same as GOST R43 rail. P43 steel railis a Chinese ... |
