.

Digital- Analog Lab

The DIGITAL-ANALOG LAB is intended for elementary as well as advance training of Digital & Analog electronics. The trainer covers regular digital & analog circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules, through use of 2mm brass terminals and patch cords. Various clock generators, logic level input/output indicators and DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set.

FEATURES:
- Bread Board : Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280 tie
points and 4 Distribution Strip swith 100 tie points each, totaling to 1680 tie points. (Size:112mm
x170mm)
- Regulated DC Power Supply : +5 V at 1 Amp, -5 V at 1Amp, +12 V/ 0 to 20V at 500mA, and -12 V/ 0 to -20 V at 500 mA
- AC Supply : 5-0-5V, 10-0-10V at 100mA. Can be used as 5V, 10V, 15V, 20V, and also as center tap
- Function Generator : Sine / Square / Traingular / Pulse waveform frequency 1 Hz to 110 Khz in 5 Steps. Variable in between
steps. Sine / Square / Traingular waveform output 50mV ~ 10Vpp variable
- Clock Generators : 0.1Hz and 100 Hz, Independent fixed TTL 5V outputs
- Variable Clock Generators : low frequency variable clock 1 Hz to 10 Hz Fixed TTL 5V output
- Pulser Switch : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the
counter after every clock pulse)
- Data Switch : 16 independent logic level inputs to select High / Low TTL levels, each with a LED to indicate high / low
status and termination
- Logic Indicators : 16 independent buffered logic level indicators for High / Low status indication of digital outputs
- Speaker : 8 ohms miniature speaker with terminations
- Digital meter (3½Digit) : Dual range DC Voltmeter 0-20V / Ammeter 0-200mA
- Continuity Tester : For testing the continuity. Provided with Beeper Sound
- Potentiometers : 6 Potentiometers (1K, 22K, 47k, 100K, 100K and 1Meg) with terminals
- BNC to banana adapter : 2 Nos. BNC to 2 channel banana adapter
- Computer interface : Facilities connecting your trainer to either Rs232 communication port of PC ADAPTER using 25 pin
(male) connector through 25 nos. of 2 mm banana sockets
- On Board Switches : 2 Switches singal pole double through
- Connecting terminals : 2 / 4 connecting terminals
Seven segment LED - Display : 2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals
LED Bar Graph : With 10 LED Indicators and 20 termination
Logic Probe : Logic level indicator for TTL/CMOS
Power : 230 V ± 10%, 50 Hz



Отправить запрос, связаться с поставщиком

Кому: Tesca Technologies Pvt. Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Digital- Analog Lab
Digital- Analog Lab The DIGITAL-ANALOG LAB is intended for elementary as well as advance training of Digital & Analog electronics. The trainer covers regular digit...
Multimedia Computer Trainer
Multimedia Computer Trainer This trainer provides training of hardware and software theory of a based on Intel Celeron CPU with experiments on 98 & XP. FEATURES 01 The Di...
PC Based Motorized Antenna Trainer
PC Based Motorized Antenna Trainer PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly used ant...
Satellite Trainer
Satellite Trainer Features: * Emulation of path loss at uplink and downlink * Emulation of frequency translation * High RF output power and low noise * PLL synthesiz...
Power Electronics Lab
Power Electronics Lab Power Electronics Lab is used to perform power electronics circuit experiments. It is very useful in power electronics laboratories for performing ...
Все товары поставщика

Похожие товары

Carbide MRMN800-LH Grooving Insert Dies for Punching Grooving and Parting Insert
Carbide MRMN800-LH Grooving Insert Dies for Punching Grooving and Parting Insert Продавец: Sichuan Burray Cemented Carbide Co., Ltd. Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperatu...
Carbide PNUG090508 5 Sides Insert Powder Metallurgy Punches Dies
Carbide PNUG090508 5 Sides Insert Powder Metallurgy Punches Dies Продавец: Sichuan Burray Cemented Carbide Co., Ltd. Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperatu...
Carbide C-31-HD Double Holes Hemisphere Pressing Dies
Carbide C-31-HD Double Holes Hemisphere Pressing Dies Продавец: Sichuan Burray Cemented Carbide Co., Ltd. Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperatu...
Cemented Carbide Material Insert Punch Dies
Cemented Carbide Material Insert Punch Dies Продавец: Sichuan Burray Cemented Carbide Co., Ltd. Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperatu...
WJD1485 Carbide Custom Non-standard Stamping Star Shapes Dies
WJD1485 Carbide Custom Non-standard Stamping Star Shapes Dies Продавец: Sichuan Burray Cemented Carbide Co., Ltd. Powder forming mold is to put powder into the to compress, solidify, and sinter at high temperatu...