Toy burning tester

• 

The Toy burning tester is designed to determine the safety property (flammability) of equipment, and the fire-proof performance of toys and raw materials as per DIN EN 71-2 specifications.Different types of specimens are fixed on corresponding specimen clamps, and exposed to the flame of the burner. When the test finishes, the tester generates report containing all flame performance data.

Standards
BS EN 71-2 Safety of toys -Part 2: Flammability
GB 6675 National toy standards

Features
The tester is suitable three types of tests with different specimen clamps for replacement, easy operation and quick installation. The tester is able to detect the ignition position automatically, which provides convenience for operator and better guarantees the accuracy of test.

A. Testing hairy or mustache-like materials: 1) if the length of material is over or at 50 mm , vertically place the fire-jet head with vertical flame height at 20±2mm. When the top of the fire-jet head is 10mm away from the specimen bottom, ignite the fire for 2±0.5s. 2) If the length of material is less than 50 mm, place the fire-jet head at an angle of 45° with vertical flame height at 20±2mm. When the edge of the fire-jet head is horizontally 5mm away from the toy surface and at least 20mm away above the bottom edge of the toy, ignite the fire for 5±0.5s.

B. Testing toys allowing children to enter into: vertically place the fire-jet head with the vertical flame height at 40±3 mm. When the top of the fire-jet is 30±2 mm away from the specimen bottom, ignite the fire for 10±1s.

C. Testing furry or stuffed toys: place the fire-jet head at an angle of 45° with vertical flame height at 20±2mm. When the edge of the fire-jet head is horizontally 5mm away from the toy surface and 20mm-50mm away above the bottom edge of the toy, ignite the fire for 3±0.5s. Note: if the toy is over 520mm long, it is necessary to calculate the burning rate if the area from the ignition position to the contact line.

Другие товары поставщика

	textile sublimation color fastness tester	Testing Standards: ISO 105 X11/P01, BS 1006, AATCC 92/114/117/133, GB/T 5718/6152, DIN 54022/54060, JIS L0879/L0850 Applications: Scorch/Sublima...
	IULTCS Rubbing Color Fastness Tester	This instrument is used to test the rubbing fastness of leather surface under dry friction and wet friction as well as other test conditions. Basic...
	Fiber fineness analyzer	Mainly used for the determination of wool, rabbit hair and other animal fiber diameter and other natural, artificial mixed, blended product fiber c...
	Medical Face Mask Air Exchange Pressure Difference Tester	Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical m...
	EN 149 Half Mask and Meltblown Fabric Automatic Particulate Filtering Performance Efficiency Tester	The tester is used for performance testing of filter elements, disposable masks, filter media, etc. forFilter performance tester ofrespirator.It's ...

Похожие товары

	Self-adhesive stickers	Продавец: Shenzhen Huaxinmei Printing Co., Ltd.
	浇筑修复巴氏合金轴瓦轴套锡基合金轴瓦轴套	Продавец: 河南桦创金属材料贸易有限公司	浇铸巴氏合金轴瓦 锡基合金挂瓦 修复轴瓦 巴氏合金是浇铸滑动轴承（轴瓦）轴衬，轴套的易熔合金通常又叫作钨金.白合金。它主要有锡基和铅基两种，所以又分别把它叫作锡基轴承合金（锡基巴氏合金）和铅基轴...
	电梯钢丝绳铅基合金铅基巴氏合金耐磨锡基合金	Продавец: 河南桦创金属材料贸易有限公司	电梯钢丝绳铅基合金铅基巴氏合金抗压锡基巴氏合金 铅是化学元素，其化学符号是Pb（拉丁语Plumbum），原子序数为82。铅是柔软、延展性强的弱金属，有毒，也是重金属。铅的本色为青白色，在空气中表...
	各种型号机床巴氏合金轴瓦滑块	Продавец: 河南桦创金属材料贸易有限公司	各种型号机床巴氏合金轴瓦滑块 巴氏合金轴瓦托瓦滑块，巴氏合金的工艺包括很多，但基本的就是底瓦的准备，1、底瓦表面镀锡打底，底瓦表面镀底锡是为了使巴氏合金与底瓦接合更牢固、紧密。因为巴氏合金中的锡...
	巴氏合金推力瓦的作用和特点	Продавец: 河南桦创金属材料贸易有限公司	巴氏合金推力瓦的结构怎样,有什么特点? 巴氏合金推力瓦的顶视为扇形,一般在60~120mm厚的钢质瓦坯表面加I出纵横鸽尾槽或方槽,然后浇铸钨金。 ACPM-2308-TR1用钨金作瓦面的优点是:...