Retractable pneumatic retractable tank washer machines
High impact 3D rotary tank washer
Model number: STP-450 retractable rotary tank washer
Working Principle:
Impeller is driven by cleaning fluid and drives internal reduction mechanism. Gear mechanism operates according to set track to realize the revolution and the rotation, thereby achieving 360° thorough cleaning.
Programmed rotation machines:The cleaning fluid drives via the turbine an internal gear reducer that keeps the sprayer turning in two planes.In the course of spraying cycle, the jets sweep the entire inside surface of the tank according to the preprogrammed, model-specific pattern.This takes a certain amount of time, but these models generate the highest jet pressures (= force of impact) and are therefore ideal for very large tanks and the toughest of cleaning tasks.
The standard machine configuration uses two or four nozzles to blast the tank walls and rinse all surfaces. In operation, the unit has to run for the cycle time between on type 8 and 12 min depending on type and pressure. This ensures full cleaning. For extremely difficult applications the cleaning time might have to be extend.
Features & Benefits:
●Optimized structural design results in a water jet that produces greater impact
●Excellent sealing design, less than 3% leakage
●Independent gearbox design protects gear from damage and can work inpoor water quality
●Adopt high hardness and wear resistant materials, long service life
●Customizable retractable, such as material, stroke length, spray diameter, connection,etc
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
2800 bar Pump Units | For concrete removal, heat exchanger cleaning, road marking removal,aireport runway marking removal,pipleline repair, high pressure cutting and pre... |
 |
Initial drying resistance test machine | Standards GB9779-2015 GB14907-2002 GB/T9271-2008 JG/T24-2000 Technical parameters 1. axial fan, can be stepless speed regulation 2.Test th... |
 |
SUGA U48 Carbon Arc Aging Tester | Main purpose: The Si80 domestic carbon arc aging chamber is a comprehensive climate testing device mainly used to simulate the changes in materi... |
 |
3D Tank Cleaning Device Water Jet Tank Washing | STD Tank Cleaning Machine •Utilizing rotary impingement technology to blast hard-to-remove residues inside of tank in a precise and global pa... |
 |
Wyzenbeek or Oscillatory Abrasion Tester-QINSUN | Product introduction: Wyzenbeek wear resistance tester, also known as Oscillatory wear resistance tester, is used to test the wear resistance of f... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
