Retractable pneumatic retractable tank washer machines
High impact 3D rotary tank washer
Model number: STP-450 retractable rotary tank washer
Working Principle:
Impeller is driven by cleaning fluid and drives internal reduction mechanism. Gear mechanism operates according to set track to realize the revolution and the rotation, thereby achieving 360° thorough cleaning.
Programmed rotation machines:The cleaning fluid drives via the turbine an internal gear reducer that keeps the sprayer turning in two planes.In the course of spraying cycle, the jets sweep the entire inside surface of the tank according to the preprogrammed, model-specific pattern.This takes a certain amount of time, but these models generate the highest jet pressures (= force of impact) and are therefore ideal for very large tanks and the toughest of cleaning tasks.
The standard machine configuration uses two or four nozzles to blast the tank walls and rinse all surfaces. In operation, the unit has to run for the cycle time between on type 8 and 12 min depending on type and pressure. This ensures full cleaning. For extremely difficult applications the cleaning time might have to be extend.
Features & Benefits:
●Optimized structural design results in a water jet that produces greater impact
●Excellent sealing design, less than 3% leakage
●Independent gearbox design protects gear from damage and can work inpoor water quality
●Adopt high hardness and wear resistant materials, long service life
●Customizable retractable, such as material, stroke length, spray diameter, connection,etc
Send product request
Other supplier products
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive... |
 |
Automatic cleaning system highway transportation tank car | The STD series automatic cleaning system is suitable for cleaning tank car that transport dangerous chemical products; tank trucks are loaded with ... |
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
 |
High Temperature Half Thermal Manikin | Product Introduction: This head and torso is designed for testing clothing and headgear in high temperature environments. The head and torso are ... |
 |
Steam Jet Testers | Standards DIN EN ISO 16925:20 DBL 5416 Ford BO 160-04 GM 9531 Volvo STD 423-0015 VW PV 1503 BMWAA-0136 Renault D 252018 PSA D 255376 MA... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
