360 spray 3D rotary jet head for large tanks
High impact 3D rotary tank washer
Model number:STD 20 3D rotary jet head
Impeller is driven by cleaning fluid and drives internal reduction mechanism. Gear mechanism operates according to set track to realize the revolution and the rotation, thereby achieving 360° thorough cleaning.
Programmed rotation machines:The cleaning fluid drives via the turbine an internal gear reducer that keeps the sprayer turning in two planes.In the course of spraying cycle, the jets sweep the entire inside surface of the tank according to the preprogrammed, model-specific pattern.This takes a certain amount of time, but these models generate the highest jet pressures (= force of impact) and are therefore ideal for very large tanks and the toughest of cleaning tasks.
The standard machine configuration uses two or four nozzles to blast the tank walls and rinse all surfaces. In operation, the unit has to run for the cycle time between on type 8 and 12 min depending on type and pressure. This ensures full cleaning. For extremely difficult applications the cleaning time might have to be extend.
Features & Benefits:
●Optimized structural design results in a water jet that produces greater impact
●Excellent sealing design, less than 3% leakage, thus saves cleaning fluid
●Independent gearbox design protects gear from damage and can work inpoor water quality
●Adopt high hardness and wear resistant materials, long service life
●The rotating shaft and other parts are made of tungsten carbide, which has a longer service life
Cleaing Effection ( Before & After )
Application:
STD DG20 series rotary tank washer is suitable for three-dimensional cleaning of medium and large tanks, spray dryer, fracturing mud tanks, fermentation tanks, cabin and storage tanks, such as oil tank cleaning stations, beer, pharmaceuticals, marine, chemical, industrial fermentation industry and occasions requiring high-impact cleaning.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
25 liters barrel washer machine | 25 liters barrel washer machine Model barrel washer Pressure 2-3bar Mains 220V or 380V Material Stainless steel, plastic ... |
 |
Computer-controlled Explosion-proof Capillary Rheometer | Standards HG/T 4300-2012 ISO 11443 Scope of application 1. It is suitable for measuring the shear rate of plastics and polymer materials and th... |
 |
Santary tank cleaning nozzle | Application: STD ZG4 rotary tank washer is suitable for 3D cleaning of small to medium sized tanks,vessel or machines. It is commonly used in phar... |
 |
High Impact Marine Tank Cleaning Machine，Oil Tank Cleaning Machine | Working Principle: STD 45 tank washer drives the impeller through cleaning liquid and drives the transmission mechanism. The speed of rotation is ... |
 |
Automobile seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
|
|
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
