Pneumatic Dual Purpose Pourer/Stacker (Forklift)
Model: STD-200-YJT
Operates with or without air supply (flexible usability).
Pneumatic liquid-level lifting and dumping.
Manual override for emergencies.
Compact design for easy movement and manual operation.
Explosion-proof electronic scale interface (compatible with drums and grinding tanks).
Type: Pneumatic + Manual Integrated Tipping Machine
Technical Specifications:
Horizontal Position: 1420 mm from ground
Vertical Position: 1300 mm from ground
Rated Pressure: 0.6–0.8 MPa
Working Pressure: 10–12 bar
Air Hose Size: Φ600 mm
Barrel Diameter: Standard international oil drum (Φ600 mm)
Fixation Method: 360° rotatable clamping
Lifting Mechanism: Pneumatic + manual adjustment
Dimensions: 1250×950×1850 mm
Customizable Options:
Explosion-proof electronic scale integration.
Custom interfaces for specific barrel types (e.g., grinding tanks).
Model: STD-500CC
Dual-use design: Pneumatic/manual operation (works with or without air supply).
Rated load:500 kg(customizable for1000 kg / 1500 kg).
Safety-enhanced design:
Compact and portable (manual push/pull operation).
Anti-slip copper plates on fork contact surfaces.
Reinforced structure for stable lifting.
Type: Pneumatic Dual-Use Stacking Machine (with forks)
Technical Specifications:
Hose size:Φ12–16 mm
Air consumption:500–980 L/min
Pneumatic (air pressure:0.6–0.8 MPa)
Manual assist (optional)
Lifting Capacity: 500 kg (base model)
Drive Modes:
Air Supply:
Lifting Height:1400 mm
Fork Width:100 mm(max.)
Lifting Stroke:950 mm
Customizable Options:
Higher load capacity (1000 kg / 1500 kg).
Fork width adjustment (based on customer requirements).
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fogging Tester for Automotive & Textile Materials-QINSUN | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash... |
 |
Reciprocating Wear Tester | Standards ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate... |
 |
Adhesion Tester | The tack - holding tester, also known as the tack - holding property tester, tack - holding force tester, or holding - power tester, is a device sp... |
 |
Wire Bending Test Machine | Product Introduction: Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi... |
 |
Moisture friction and wear testing machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
Похожие товары
 |
Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
