Pneumatic Dual Purpose Pourer/Stacker (Forklift)
Model: STD-200-YJT
Operates with or without air supply (flexible usability).
Pneumatic liquid-level lifting and dumping.
Manual override for emergencies.
Compact design for easy movement and manual operation.
Explosion-proof electronic scale interface (compatible with drums and grinding tanks).
Type: Pneumatic + Manual Integrated Tipping Machine
Technical Specifications:
Horizontal Position: 1420 mm from ground
Vertical Position: 1300 mm from ground
Rated Pressure: 0.6–0.8 MPa
Working Pressure: 10–12 bar
Air Hose Size: Φ600 mm
Barrel Diameter: Standard international oil drum (Φ600 mm)
Fixation Method: 360° rotatable clamping
Lifting Mechanism: Pneumatic + manual adjustment
Dimensions: 1250×950×1850 mm
Customizable Options:
Explosion-proof electronic scale integration.
Custom interfaces for specific barrel types (e.g., grinding tanks).
Model: STD-500CC
Dual-use design: Pneumatic/manual operation (works with or without air supply).
Rated load:500 kg(customizable for1000 kg / 1500 kg).
Safety-enhanced design:
Compact and portable (manual push/pull operation).
Anti-slip copper plates on fork contact surfaces.
Reinforced structure for stable lifting.
Type: Pneumatic Dual-Use Stacking Machine (with forks)
Technical Specifications:
Hose size:Φ12–16 mm
Air consumption:500–980 L/min
Pneumatic (air pressure:0.6–0.8 MPa)
Manual assist (optional)
Lifting Capacity: 500 kg (base model)
Drive Modes:
Air Supply:
Lifting Height:1400 mm
Fork Width:100 mm(max.)
Lifting Stroke:950 mm
Customizable Options:
Higher load capacity (1000 kg / 1500 kg).
Fork width adjustment (based on customer requirements).
在线联系供应商
Other supplier products
 |
Tank Cleaning Equipment, portable tank washing machine | STD broad range of tank cleaning machines, reaction drives, static spray balls, spray nozzles,rotary spray nozzles, and 3d high impact tank cleanin... |
 |
Sample machine | Purpose: The products are suitable for all kinds of textiles, leather, nonwovens and other products in the inspection of samples. Wide application... |
 |
AC/DC High - Voltage Testing Machine for Automotive Wires | Standards ISO 6722. ISO 14572: International standards for automotive cables and electrical continuity. IEC 60529: IP code compliance for dust/... |
 |
Automotive Wires Dynamic Bending Tester | Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses. SAE J1128: Low-voltage primary cable for automotive applicatio... |
 |
SUGA GX75 7.5kW Xenon Weather Meter | Applicable Standards The GX75 meets stringent international standards, including: ISO 4892-2,ASTM G155,SAE J2527(automotive coatings) JIS K7... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
