Automotive Wires Liquid Resistance Tester
Test Standards:
Requirements for liquid resistance tests of automotive wires in ISO 6722. SAE J1128. QC/T 730. and JASOD611
Main Parameters:
Test Oils:
1. Heat - retaining and heating oils (to be provided by the user): It is recommended to use oils with high boiling points and low volatility, such as transformer oil. If the test temperature is low, water can be used.
2. Test media (to be provided by the user): Gasoline, diesel, engine oil, alcohol, power steering fluid, automatic transmission fluid, engine coolant, battery acid, etc.
Temperature: Ambient temperature ~ 250℃
Test set: Circular quartz glass oil cup: diameter 100mm X 350mm
Inner container volume: 400 X 450 X 450mm
Stirring: Motor - driven stirring
Volume (approximate): Dimensions: 800 X 560 X 850 (mm)
Material: Inner and outer stainless steel
Temperature sensor: Pt100
Weight (approximate): 100Kg
Power supply: 1 - phase AC380V 50Hz 7.5A Total power: 4KW
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Paper Grammage Tester | Introduction: The circular square quantitative sampler (referred to as quantitative sampler) is a special sampler for the quantitative determinati... | |
| Flame retardant paper and board burning tester | Technical parameters: 1. Ambient temperature :-10℃——30℃ 2. Relative humidity :{<}85% 3. Power supply voltage and power :220V 10% ... | |
| Solar Radiation Meters | Product Introduction: The purpose of this instrument is to measure the temperature change of the sample with radiant heat. Arrange the sample and... | |
| Automotive connector insertion and withdrawal force testing machine | Standards Designed to meet rigorous automotive industry standards, including ISO 5023. IEC 60512. and USB-IF specifications, our testing machine e... | |
| (Ford) Automotive wire flexibility testing machine | Applicable standards: Engineering Specification-Ford Global Wire specificationPART NO. ES-AU5T-1A348-AA Scope of application: Suitable for wir... |
Похожие товары
| Seat Bumping and Creep Test Bench | Продавец: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... | |
| Automobile seat belt fixed point test bench | Продавец: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... | |
| Impact strength tester for car seat headrest | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... | |
| Impact strength tester for car seat launching headrest | Продавец: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... | |
| Automobile Headrest Strength Tester | Продавец: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
















