PMI Foam CASCELL® RS
Cascell®RSis specially developed for use as a structural core in connection with vacuum infusion processes, such as VARI and RTM. It is applied in components of aviation, aerospace, sports equipment with resin injection process to reduce the weight. Its mechanical and thermomechanical properties are similar to those ofCascell®WH. Its cell size, which is smaller, achieves an optimal compromise between low resin absorption-about 30% less than forCascell®WH-and satisfactory bonding of the facings to the core.
|
Type |
Test Method |
Units |
CASCELL® |
CASCELL® |
CASCELL® |
CASCELL® |
CASCELL® |
|
Density |
ISO845 |
Kg/m3 |
30 |
50 |
75 |
110 |
200 |
|
Compressive Strength |
ISO844 |
MPa |
0.40 |
0.85 |
1.70 |
3.60 |
9.50 |
|
Tensile Strength |
ASTM |
MPa |
0.80 |
1.68 |
2.30 |
3.70 |
7.00 |
|
Elastic Modulus |
ASTM |
MPa |
38 |
83 |
108 |
197 |
380 |
|
Elongation |
ASTM |
% |
2.4 |
2.6 |
2.8 |
2.8 |
3.0 |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
CASCELL® IH | Cascell®IH products are closed-cell rigid foams based on polymethacrylimide (PMI) chemistry,product is specially developed for general industr... |
 |
CASCELL® RS | Processing and production Cascell®RS is especially suitable for vacuum infusion and RTM processes due to its optimized cell structure, where it... |
 |
CASCELL® WH - pmi foam | Processing and production Cascell® WH can take curing temperature up to 130°C and pressure up to 0.3MPa. After heat treatment, Cascell®... |
 |
CASCELL® HF | Processing and production With an extremely fine closed-cell structure, the foam has minimal resin uptake and problem-free compatibility with meta... |
 |
cascell |
