2012 hot sales mobile phone merchandise security display
Basic Specification
Operating Voltage 5V DC
Horn Alarm Output ≤120 db at 1 ft
Stand-by Current Consumption ≤3.70mA
Quiescent Current Consumption ≤3.40mA
Activation Current Consumption ≤220mA
Metal Display Frame Color Black/White
Battery Lithium-ion battery
the charging function You can charge the 4.2V digital products output.
Set up defences: Wireless Remote control
Package Included: series (Remote Control Demo-Alert).
Universal USB Adaptor 5Vdc / 500mA.
Infrared Remote Control.
USB to mini USB Cable.
Magnetic Detecting Sensor Cable.
Micro USB to 3.5Φcharge cable.
Function: A disconnect alarm function: contacts separated alarm, disconnect alarm, USB jack unplug alarm.
Fortification solution and Defense: auto fortification; solution of anti-manually or remote control anti-solution.
Remote control: Infrared remote control ON (Active) / OFF.
Features: Quick Reaction speed, pull or cut the USB cable, the Alarm warning.
Once the alarm has been triggered, restitution cannot disarm, the alarm must be reset by remote control “OFF” key to disarm (press remote control “OFF” key to relief). With high safety factor, it can protect customer’s property.
Built-in alarm horn, high-volume alarm on the bottom, can avoid destruction of the thief.
With Remote Control function, easy to use.
LED light display current status.
Wide range Application: retail chain store or exhibition center for Tablet PC, Camera, Smart Phone, GPS and other exhibits anti-theft and reusable .
Operating Step: Power ON/OFF Slide Switch: Please turn power ON before setting (on the bottom).
Tear off 3M stickers on the bottom, and stick MX-33P metal bottom on display desk.
Tear off 3M sticker (on Magnetic sensor) and stick on rear side Smart Phone.
Tear off 3M sticker on the Demo-Alert (small detecting sensor), and stick on Smart Phone (front or rear side surface).
Set up Demo-Alert in Active position: press ON button on Remote Control; you'll hear a beep sound and Red LED blinking (one time), the MX-33P in Active position.
Demo-Alert Sensor: 3 detecting sensors and jack connector are detect point, either one of detecting sensor Slip or jack disconnecting (active position), Alarm warning immediately and Blue LED blinking until alarm relief.
Relief alarm: press Remote Control OFF button to relief alarm warning and hear horn alarm.
Active Display Charge: the MX-33P provide charge function, when Smart Phone battery low, you can plug charge cable between Smart Phone (Micro USB port) and Magnetic connector (a black hole at left side Magnetic connector), or direct charge from Adaptor to Smart Phone.
Low Power Indicator: when green LED light blinking, please plug USB port into to AC adaptor, mini USB plug into left side Demo-Alert metal base, then AC adaptor plug into Outlet (please avoid battery dried-up).
Working Period (in Active): 2 weeks (full charge).
Charge Time: 5 hours.
Low Power: Green LED blinking until power dried-up or charge.
Charging: Red LED turns ON.
Full Charge: Green LED turn ON.
Alarm: Red LED Blinking.
In Active (when you set up Alarm): Blue LED Blinking.
Remote Control: 5 units with one remote control.
alarm reaction as following ways:
break circuit resistance
short circuit resistacne
other circuit-replacing resistacne
cut the resistance
prying and cutting spring wire
remove the sensor
pull out connector
Другие товары поставщика
Все товары поставщика
Похожие товары
