Filter Media Tester CIF 1000

• 

CIF 1000 test rig for standard tests on motor vehicle passenger compartment filters in accordance with DIN 71460 part 1 and ISO/TS 11155-1 .
Palas®offers the CIF 1000 test rig with the Promo®1000 unit for standard tests on motor vehicle passenger compartment filters in accordance with DIN 71460 part 1 and ISO/TS 11155-1.
The volume flow is automatically regulated and adjustable from 60 to 800 m3/h. With the aid of the CIF, both the fraction separation efficiency and the burden on the complete filters or filter media are measured and evaluated.Particle dosing for the filter test is performed with the brush generator RBG 1000, which has been internationally established for over 30 years. On the CIF 1000, overall and fraction separation efficiency are determined with the high-resolution light scattering spectrometer Promo®1000.This allows reliable tests to determine the separation efficiency and burden tests to be performed across the entire measurement range for all particle sizes.The advantage of the Promo®1000 is the larger measurement range for particles from 120 nm. Following ISO/TS 11155-1, the test rig is additionally equipped with the salt aerosol generator AGK 2000. In the testing conduit, filter media up to a size of approx. 220 x 500 mm can also be tested under the conditions stated above. In order to test the influence of real ambient conditions on the separation behavior of filters, Palas®offers an upgrade to the CIF test rig with climate technology components foradjustment of the temperature between +18°C and +90°C and the relative humidity between 30% and 70%. As an option, the test rig can be upgraded after provision of the measuring equipment for gas analysis for investigations of the adsorption and desorption dynamics following DIN 71460 part 2 and ISO/TS 11155 part 2.
The CIF is equipped with ahigh-pressure ventilator, which can be throttled on the pressure side with infinitely variable adjustment and is frequency-controlled, and which can be automatically regulated via the FTControl filter test software for regulation of the volume flow. Furthermore, sensor data such as the volume flow, temperature, relative humidity and differential pressure at the filter are also recorded automatically during the filter test. The aerosol generators and the corona discharge can be actuated via the FTControl software.
Measurement of the fraction separation efficiency

Descriptions
Clear demonstration of the separation efficiency of your filters or filter media throughout the entire measurement range from 120 nm to 40 µm with the Promo®1000 system
Highest measurement reproducibility and repeatability highlight even fine differences in the separation efficiency
Short measurement times of around 2 minutes per separation efficiency measurement thanks to optimized application
Simple comparison of separation efficiency curves, calculation of mean values also possible Burden / hold time measurement and record of the pressure loss curve
Measurement point switching device

Benefits
Particle measurements from 120 nm
Measurement and evaluation of fraction separation efficiency and burden
Automatic data acquisition for barometer pressure, temperature, humidity, differential pressure
Temperature control (+18°C to +90°C) and moisture control (30 – 70%)
Automatic actuation of all test rig components
Automatic performance of the measurement processes
Individual programming of measurement processes for filter testing using the FTControl software
Separate measurement and analysis parts – this saves time and money, as the analysis can be performed while the measurement is still on-going
Printouts and saving of complete test records
Easy access to all data for the recorded measurement signals from the up to 6 external sensors
Low-maintenance
Easy operation
Reliable operation
The unit will reduce your operating costs

Другие товары поставщика

	Tearing Strength test instrument	IntroductionLiftthependulumuptoacertainheighttogiveitaninitialpotentialenergy.Thependulumtearsthespecimenwhileswingingdown.Theelectronictestsystemc...
	Flammability Tester for Construction Materials	Flammability Tester for Construction Materials is used to detect a variety of building materials and combustion performance measurement and control...
	Sweating Guarded Hotplate thermal resistance tester for fabrics heat insulation	Sweating Guarded Hotplate is the most professional, stable and advanced Thermal and Evaporative Resistance test instrument in the world. Human ski...
	carpet flammability equipment	Standards:BS 4790, ISO 6925, BS 6307Applications:The Flammability Tester is used to test the effects of a small source of ignition on floor coverin...
	physiological thermal and water-vapor resistance tester	TestingStandards:ISO3005,BS4323,NEXTTM15,M&SP8,IWTO29-76Applications: Usedforsteamingshrinkagetestoffabric, and reproducibility measurementfor...

Похожие товары

	Dining Furniture Executive Computer Chair Meeting Room Gaming Task Computer Boss Chair Office Chairs With Wheel	Продавец: Hebei Dining Furniture Co., Ltd	1.Model: DC-B18 High-back Mesh Office ChairOffice Chairs With Wheelgaming task computer boss cha...
	Dining Furniture Comfort Adjustable Height with Wheels Home Office Study Task Chair	Продавец: Hebei Dining Furniture Co., Ltd	1.Model:DC-B17 Home Office Study Task ChairAdjustable Height with Wheels ChairComfort Seat moq:...
	Salon Chair	Продавец: 838165
	Bar Chair	Продавец: 838165
	Bar Chair	Продавец: 838165