Cooling Tower Spray Nozzle
Cooling tower nozzleis the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower.
As a professional manufacturerof industrial cooling towers llc, we offer different types of water distribution spray nozzles for cooling towers. You can choose what you need from the following products.
Advantage of Cooling Tower Spray Nozzle
High strength, light weight, low water pressure, low spray height, uniform water distribution, good splash effect, convenient installation and maintenance, adjustable water volume, good heat dissipation effect, especially suitable for cooling water. Even water distribution, low working pressure (nozzle outlet working pressure is only 0.6mH2O), large pressure range, not easy to block. Because of its special designed locking and anti loosing device, it can be firmly connected with the water distribution pipe without falling off, which can ensure the long-term safe operation of the water distribution system. Under normal use conditions, the service life of the nozzle is 20 years.
Working Principle of Cooling Tower Nozzle
When the hot water flows through the spray nozzle, the swirling flow is generated under the action of the swirling plate in the nozzle, and the hot water is sprayed upward, and after the heat exchange with the air, the cold water falls into the pool, and the hot air is discharged into the atmosphere by the tower top duct after water removal by the water collector. It rotates in the cavity and rotates downward to eject from the lower nozzle. After the water is ejected, it forms an umbrella shaped rotating water body, impacts the splash strip and splash blade, and splashes into evenly distributed mist like small water droplets, falling to the top surface of the filler.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cross Flow Cooling Tower | Cross flow type cooling toweris an induced draft cooling tower that can cool water. The water flows vertically from the top of the tower, and the a... |
 |
Cooling Tower Air Inlet Louvers | The cooling tower air inlet louver is also called air inlet grille, which is used to replace the air inlet shutter of the old cooling tower. The ai... |
 |
Cooling Tower Gearbox | The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is generally used for transmission equipment with low speed... |
 |
Cooling Tower Air Inlet Louvers | The inlet louver cooling toweris also called air inlet grille, which is used to replace the air inlet shutter of the old cooling tower. The cooling... |
 |
40 Tr Cooling Tower | 40 Tr Cooling Tower Closed Circular Cross Flow Cooling Tower(AHC) It refers to a cooling tower in which the cooling hot water passes through the ... |
Похожие товары
 |
Carrier Compressor | Продавец: 854190 | Looking for Copeland Compressor? Contact A&S Aerodynamic Co., Ltd. for more information. A&a... |
 |
Hanbell Compressor | Продавец: 854190 | Looking for Copeland Compressor? Contact A&S Aerodynamic Co., Ltd. for more information. A&a... |
 |
Copeland Compressor | Продавец: 854190 | Looking for Copeland Compressor? Contact A&S Aerodynamic Co., Ltd. for more information. A&a... |
 |
Hitachi Compressor | Продавец: 854190 | Looking for Copeland Compressor? Contact A&S Aerodynamic Co., Ltd. for more information. A&a... |
 |
Daikin compressor | Продавец: 854190 | Looking for Copeland Compressor? Contact A&S Aerodynamic Co., Ltd. for more information. A&a... |
