Cooling Tower Spray Nozzle
Cooling tower nozzleis the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower.
As a professional manufacturerof industrial cooling towers llc, we offer different types of water distribution spray nozzles for cooling towers. You can choose what you need from the following products.
Advantage of Cooling Tower Spray Nozzle
High strength, light weight, low water pressure, low spray height, uniform water distribution, good splash effect, convenient installation and maintenance, adjustable water volume, good heat dissipation effect, especially suitable for cooling water. Even water distribution, low working pressure (nozzle outlet working pressure is only 0.6mH2O), large pressure range, not easy to block. Because of its special designed locking and anti loosing device, it can be firmly connected with the water distribution pipe without falling off, which can ensure the long-term safe operation of the water distribution system. Under normal use conditions, the service life of the nozzle is 20 years.
Working Principle of Cooling Tower Nozzle
When the hot water flows through the spray nozzle, the swirling flow is generated under the action of the swirling plate in the nozzle, and the hot water is sprayed upward, and after the heat exchange with the air, the cold water falls into the pool, and the hot air is discharged into the atmosphere by the tower top duct after water removal by the water collector. It rotates in the cavity and rotates downward to eject from the lower nozzle. After the water is ejected, it forms an umbrella shaped rotating water body, impacts the splash strip and splash blade, and splashes into evenly distributed mist like small water droplets, falling to the top surface of the filler.
Send product request
Other supplier products
 |
200 Ton Cooling Tower | Square Cross Flow Cooling Tower (AH) The cross flow tower is the abbreviation of cross flow cooling tower. The cross flow tower refers to equipmen... |
 |
30 Ton Cooling Tower | Closed Circular Cross Flow Cooling Tower(AHC) It refers to a cooling tower in which the cooling hot water passes through the packing from top to b... |
 |
Mechanical Draft Cooling Tower | A mechanical draft cooling towers, also known as a mechanical draft tower, is a cooling tower ventilated by wind, which is the main equipment of ci... |
 |
Cooling Tower | What Is A Cooling Tower? The cooling toweris equipment that uses water as a circulating coolant to absorb heat from a system and discharge the c... |
 |
Cooling Tower | Zhejiang Aoshuai Refrigeration Co., Ltd. is a professional cooling tower companythat supplies FRP cooling towerand cooling tower spare parts. Indus... |
Same products
 |
Cooling Tower Motor | Seller: Zhejiang Aoshuai Refrigeration Co., Ltd | Cooling tower motoris a new type of energy-saving and environmental protection improved motor, wi... |
 |
Cooling Tower Air Inlet Louver For Mesan | Seller: Zhejiang Aoshuai Refrigeration Co., Ltd | The sectional louver made from light-weight corrosion-free PVC sections offers easy access to col... |
 |
Cooling Tower Gearbox | Seller: Zhejiang Aoshuai Refrigeration Co., Ltd | The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is genera... |
 |
Cooling Tower Float Ball | Seller: Zhejiang Aoshuai Refrigeration Co., Ltd | The cooling tower float ball, also called the float valve, is designed at the bottom of the pool.... |
 |
Cooling Tower Filling For Gea | Seller: Zhejiang Aoshuai Refrigeration Co., Ltd | GEA filling is made of corrugated PVC sheet, which can obtain maximum strength by solvent welding... |
