40 Ton Cooling Tower
Closed Circular Cross Flow Cooling Tower(AHC)
It refers to a cooling tower in which the cooling hot water passes through the packing from top to bottom, while the air flows through the packing from horizontal and oblique directions, and the flow direction of hot water and the air is nearly 90 degrees (some manufacturers also call it direct cooling tower).
Features Of Closed Circular Cross Flow Cooling Tower
Structural Drawing Of Closed Cross Flow Cooling Tower
Application Scope Of Closed Circular Cross Flow Cooling Tower
The closed circular cross flow cooling tower fan adopts a silent large blade fan, which makes the noise at the outlet of the cooling tower lower. The gravity pool type water distribution is adopted. The spray water enters into the basin and then passes through the nozzle under the action of gravity. The heat exchange filler under the spray and the heat exchanger of the closed cooling tower. After passing through the heat exchanger, it naturally flows into the bottom sump. Therefore, the noise of a closed circular cross flow cooling tower is lower than that of a closed counter flow cooling tower. There was no sound of water dripping into the pan. Compared with the counter flow cooling tower, the closed circular cross flow cooling tower can be assembled side by side, which has a smaller floor area. Therefore, the cross-flow closed cooling tower is more suitable for occasions with high noise requirements and a small floor area.
Closed Circular Counter Flow Cooling Tower(AFC)
A closed circular counter flow cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water, and circulating water heat exchange to ensure the cooling effect. It can be used for medium frequency power cooling, mechanical water jacket cooling, water source heat pump group, air compressor cooling.
Details Of Closed Circular Counter Flow Cooling Tower
Fan
The ventilation system uses the cooling tower special aluminum axial flow fan, with anteverted design wind blade, streamlined inlet blowdryer;
advantages: low wind resistance, large blast capacity, low noise, good performance, high efficiency. Use closed low noise cooling tower motor;
advantages:small volume,lightweight,excellent performance,durable.
High Efficient Drift Eliminator
Made of PVC,the saturated wet hot air meets the drift eliminator, congeal to water drops and slip to the water collector,it can effectively reduce the fluttering of water,saving water.
Cooler
AOSUA cooling coiled pipe's design ensures high cooling efficiency. the design of the double pipe make the pipe with a compact arrangement, reduces the flow resistance of the air at the same time. This design also increases the water-loading, and effectively uses the coiled pipe. According to the material, it can be divided into two types:SUS304 condensing coiled pipe and red copper condenser coiled pipe.
Air Intake Grill
AOSUA's air-inlet grille is made by adopting corrosion resistance PVC, its function is to prevent dust and dirt to enter the unit, avoid direct sunlight and splash water, reduce a part of the algae forming, and easy to clean the sink.
Circulation System
Use a closed cooling tower pump with a big flow, low lift, high efficiency, low noise, low power. The water tank is made of 304 stainless steel.
Round Counter Flow High Temperature Resistant Cooling Tower(GAB)
The filler of round counter flow high-temperature resistant cooling tower is made of PP material, which is suitable for various high-temperature industries, such as steel smelting, casting and forging, paper making, plastic production, cement production, etc. the maximum applicable temperature can reach 120 ℃, and the maximum temperature drop can reach 60 ℃.
As one of the most professional cooling tower suppliers, we provide 40 ton cooling tower, china cooling towerand etc. Contact us to know more.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cooling Tower Fan For Marley | The fan of Marley open cooling toweradopts hollow aluminum alloy extruded blade, and the fan is adjustable angle type, which can meet the different... |
 |
Cross Flow Cooling Tower | Cross flow type cooling toweris an induced draft cooling tower that can cool water. The water flows vertically from the top of the tower, and the a... |
 |
Cooling Tower Drift Eliminator For Nihon Spindle | Zhejiang Aoshuai Refrigeration Co., Ltd. is a professional cooling tower companythat supplies FRP cooling towerand cooling tower spare parts. Indus... |
 |
Cooling Tower Float Ball | AUVC, as a professional cooling tower manufacturer, has a modern processing workshop with excellent cooling tower for sale, a young and high-qualit... |
 |
Cooling Tower Air Inlet Louvers | The cooling tower air inlet louvers are also called air inlet grille, which is used to replace the air inlet shutter of the old inlet louver coolin... |
Похожие товары
 |
Cooling Tower Motor | Продавец: Zhejiang Aoshuai Refrigeration Co., Ltd | Cooling tower motoris a new type of energy-saving and environmental protection improved motor, wi... |
 |
Cooling Tower Air Inlet Louver For Mesan | Продавец: Zhejiang Aoshuai Refrigeration Co., Ltd | The sectional louver made from light-weight corrosion-free PVC sections offers easy access to col... |
 |
Cooling Tower Gearbox | Продавец: Zhejiang Aoshuai Refrigeration Co., Ltd | The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is genera... |
 |
Cooling Tower Float Ball | Продавец: Zhejiang Aoshuai Refrigeration Co., Ltd | The cooling tower float ball, also called the float valve, is designed at the bottom of the pool.... |
 |
Cooling Tower Filling For Gea | Продавец: Zhejiang Aoshuai Refrigeration Co., Ltd | GEA filling is made of corrugated PVC sheet, which can obtain maximum strength by solvent welding... |
