Automated Clothing Thermal Resistance Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standard

The instrument is designed and tested in compliance with the following international and national standards:

(1) KSF ISO 12949 – Protective clothing testing methods for chemical and biological agents

(2) ASTM E459-22 – Standard test method for thermal manikins

(3) ISO 12949-2011 – Protective clothing—Manikin-based evaluation

(4) ASTM E457-08 (2020) – Thermal manikin calibration and performance

(5) ASTM D6616-21 – Standard practice for testing full-body protective clothing

(6) BS 10/30207740 DC – UK military protective clothing standard

(7) ASTM E598-08 (2020) – Thermal manikin measurements

(8) ASTM D4683-25 – Evaluating barrier properties of protective fabrics

Capabilities and Simulation

The porton-man is computer-controlled, and when connected to its drive frame, it can walk like an infantryman, travel (at 0.5 m/s to 1 m/s), run, sit (at 2 m/s to 3 m/s), kneel, climb stairs and raise its arms as if seeing a weapon. This range of motion allows the robot to realistically simulate a variety of infantry movements and tasks, including locomotion at different speeds, changes in posture, and actions involving the upper body. This dynamic capability is crucial for evaluating how protective clothing performs during physical exertion and complex movements, which can impact its protective barrier, thermal comfort, and overall wearability.

Data Acquisition and Analysis

More than 100 sensors throughout the body can record data during testing, allowing scientists to perform real-time analysis. These numerous sensors likely measure various parameters relevant to the performance of the protective gear and the simulated physiological responses of a human wearer. Data such as temperature, humidity, pressure differentials, and potentially mass transfer or agent penetration can be collected in real-time as the robot performs its movements. This extensive data allows for detailed analysis of the protective system's performance under specific, controlled dynamic conditions.

Key Aspects

Accurate Human Representation: Designed to replicate the physical characteristics and movement patterns of military personnel.

Specialized for CB Gear Testing: Specifically built to evaluate the effectiveness of protective clothing and equipment against chemical and biological agents.

Dynamic Movement Simulation: Capable of performing a wide range of realistic infantry movements.

Extensive Data Collection: Equipped with over 100 sensors for detailed monitoring during tests.

Real-time Analysis: Enables immediate processing and interpretation of collected data.

State-of-the-Art Technology: Represents a high level of robotic and testing technology.

Features

Type: Computer-controlled robotic mannequin.

Primary Function: Testing Chemical and Biological (CB) protective clothing and equipment.

Movement Capabilities: Walk, travel, run, sit, kneel, climb stairs, raise arms.

Sensor Count: More than 100 sensors throughout the body.

Data Recording: Capable of recording data during testing.

Analysis Capability: Allows for real-time analysis of collected data.

Technical Parameters

Parameter	Specification
Type	Computer-controlled robotic manikin
Primary Function	Testing chemical and biological protective clothing and equipment
Movement Capabilities	Walk, travel, run, sit, kneel, climb stairs, raise arms
Travel Speed	0.5 m/s – 1 m/s
Run/Sit Speed	2 m/s – 3 m/s
Sensor Count	>100 sensors distributed throughout the body
Data Recording	Real-time recording during testing
Analysis Capability	Immediate processing and evaluation of collected data
Control	Computer-controlled with integrated drive frame
Dimensions	Customizable according to test configuration
Weight	Dependent on configuration

Test Procedures

(1) Mount the Porton-man on the drive frame in the testing area.

(2) Configure motion parameters (walking, running, sitting, kneeling, stair climbing, arm movements).

(3) Connect the data acquisition system to monitor sensors.

(4) Start the test sequence via the control software.

(5) Perform the desired motion tasks while the manikin collects thermal, pressure, and barrier data.

(6) Analyze recorded data in real-time or post-test for performance evaluation.

(7) Repeat as necessary for different clothing sets or test conditions.

Maintenance Information

(1) Regularly inspect mechanical joints, actuators, and sensors for wear.

(2) Calibrate sensors and data acquisition modules according to manufacturer recommendations.

(3) Clean surfaces and mechanical components using non-corrosive agents.

(4) Avoid exposure to extreme temperatures or moisture that could damage electronics.

(5) Maintain logs of test sequences, calibration, and maintenance activities.

(6) Ensure software updates are applied to control and analysis systems for optimal performance.

Другие товары поставщика

	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction In a fire, people are often smoke suffocated or unable to escape because of t...
	Salt Spray Corrosion Test Chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application This chamber is widely used in industries and laboratories to assess corrosion...
	Salt Spray Testing Machine	Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chamber is one of the artificial climate environmental “...
	Safety Helmets Against Molten Metal Splashing Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (...
	Filter Flow Rate and Performance Test Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can apply this test bench in the following scenarios: (1) Flow–pres...

Все товары поставщика

Похожие товары

	Affordable Burning Manikin System	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN ISO 11612：rotective clothin...
	Automated Body and Head Model Chemical Resistance Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed to meet...
	Automated Clothing Thermal Resistance Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard The instrument is designed and ...
	Dry Type Thermal Manikin for Thermal Comfort Research	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man...
	High-Precision Cone Calorimeter for Flammability Testing	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards This apparatus conforms to the...