Rain Test Chamber

• 

Product Information:

This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel tank. The back of the specimen is adhered to the standard suction filter paper (weighing before and after the test).

The water in the water column is sprayed into the rain by the standard nozzle, while the water column can be changed from 600mm(24 inches) to 2400mm(96 inches) by 300mm inciments (12 inches).

Therain test equipmentprovides an LCD color touch screen with an interactive user interface, which can preset the ISO and AATCC test standards, water temperature, water column height and test time.

The built-in cistern can recycle the water that is sprayed on the sample, with a heater that controls the water temperature. The precision water pump can automatically maintain the water column in the nozzle to the set the height.

Therain water spray testercannot be refitted, but can be ordered with new rain tester. We can provide a temperature-controlled water supply system that includes an electronic temperature controller, a mixing tank, and a solenoid control valve.

Standards

lEC 60529.ISO 20653.ASTM D95.MIL-STD-810 equipment.

Configuration:

1. Anti-rain testing instrument with LCD color touch screen control panel;

2. Water column pipe, 240cm;

3. Standard sprinkler nozzle;

4. Sample rack andchassis;

5. 40L reservoir;

6. 150cm water column tube (optional);

7. AATCC filter paper 500 x 1000mm(25 pieces) (optional).

Techncial Parameters:

1. Control: LCD color touch panel;

2. Water column: 60 ~ 150cm + 1.5cm (standard), 60 ~ 240cm + 1.5cm (extension);

3. Sample rack: 285 by 190mm (305mm from the nozzle);

4. Heater: 1000W;

5. Temperature control: room temperature 40 ℃ ~ + / - 0.8 ℃ (no cooling device);

6. Supply of water: tap water or distilled water;

7. Reservoir: 40L;

8. Dimensions: 700 x 600 * 2460mm (long x width x height);

9. Weight: 125kg(275lb);

10. Power supply: 23/120vac, 50/60hz.

Другие товары поставщика

	Helmets Designated Protection Areas Tester	Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t...
	Battery Adiabatic Calorimeter	Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 201...
	Scott rolling tester	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end o...
	Fully Automatic AC/DC High - Voltage Tester for Wires and Cables	Standards ISO 14572, IEC 60529: International standards for wire insulation integrity and environmental testing. UL 2556, CSA C22.2: North Amer...
	Spinal Internal Fixation System Component Testing Machine	Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connec...

Похожие товары

	Steaming Cylinder	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 3005. BS 4323. NEXT TM 15....
	Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards GB/T 12705.1/14272. BS EN 1213...
	Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards AATCC 128, ISO 9867, ENKA 3061...
	Button Impact Tester丨Button Impact Test mechine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Butt...
	AATCC Viewing Board丨AATCC Viewing Board tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Built to American Association ...