High Precision ER COLLET
Basic InfoModel NO.: 6499b, din 6499b er colletSpecification: 1.5mm to 25mmHS Code: 84661000Origin: chinaProduct DescriptionDIN 6499B ER SERIES COLLETSMade of special elastic steel material 65Mn; Hardness: HRC 44-48Powerful clamping ability, high precise accutacyUsed for boring, milling, drlling, tapping, grinding and engraving operation etc.Kinds of sets available on request. (wooden case).Detailed list and inspection tolerance as following.Inspection as in the picture middle position.Mounting instruction for ER collet and nut. (show as in picture bottom position)1. Put the collet into the nut, turn the collet slightly, pust it into the nut at the offered direction evenly. When the offset flange into the undercut of the collet.2. Fix the nut and the collet on the spindle rotate the nut until the collet is in pressing. Wipe the straight shank of cutter, and insertit into the pilot hole. Tighten the unt with a wrench till the cutter is clamped heavily(Caution: Never tighten the nut without cutter in it for it will bread)3. When changing the tool, Loosen the nut and it shall bring out the collet and the cutter together, and the draw the cutter out slighly the collet in the offered direction, it shall be ready for any change of the cutter
Другие товары поставщика
|
|
BT30-MTB5 Морс конический адаптер |
Если вы ищете Китая, токарный станок с ЧПУ, фрезерный bt30-mtb5 морс конический адаптер зажимной инструмент держатель, или точность bt30 весна-mtb5... |
|
|
|
If you are looking for China, CNC lathe, milling eoc clamping nut eoc16 clamping nut clamping tool holder, or precision spring eoc clamping nut eoc... |
|
|
|
If you are looking for China, CNC lathe, milling cat30-fma22 face milling holder clamping tool holder, or precision spring cat30-fma22 face milling... |
|
|
СК30-MTA1 Морс конический адаптер |
Если вы ищете Китая, токарный станок с ЧПУ, фрезерный ск30-mta1 морс конический адаптер зажимной инструмент держатель, или весны точности ск30-mta1... |
|
|
СК30-SLB32 держатель торцевой фрезы |
Если вы ищете Китая, токарный станок с ЧПУ, фрезерный ск30-slb32 конец мельница держатель зажима Держатель инструмента, или весны точности ск30-slb... |
Все товары поставщика
Похожие товары
