High Precision ER COLLET
![](/images/advert_8_1d7b813d77ada92b4c5998ec42a3cde9.png)
Basic InfoModel NO.: 6499b, din 6499b er colletSpecification: 1.5mm to 25mmHS Code: 84661000Origin: chinaProduct DescriptionDIN 6499B ER SERIES COLLETSMade of special elastic steel material 65Mn; Hardness: HRC 44-48Powerful clamping ability, high precise accutacyUsed for boring, milling, drlling, tapping, grinding and engraving operation etc.Kinds of sets available on request. (wooden case).Detailed list and inspection tolerance as following.Inspection as in the picture middle position.Mounting instruction for ER collet and nut. (show as in picture bottom position)1. Put the collet into the nut, turn the collet slightly, pust it into the nut at the offered direction evenly. When the offset flange into the undercut of the collet.2. Fix the nut and the collet on the spindle rotate the nut until the collet is in pressing. Wipe the straight shank of cutter, and insertit into the pilot hole. Tighten the unt with a wrench till the cutter is clamped heavily(Caution: Never tighten the nut without cutter in it for it will bread)3. When changing the tool, Loosen the nut and it shall bring out the collet and the cutter together, and the draw the cutter out slighly the collet in the offered direction, it shall be ready for any change of the cutter
Other supplier products
|
BT30-MTA2 Morse Taper Adapter |
If you are looking for China, CNC lathe, milling bt30-mta2 morse taper adapter clamping tool holder, or precision spring bt30-mta2 morse taper adap... |
|
10MM Keytape Drill Chuck |
If you are looking for China, CNC lathe, milling keytape drill chuck 10mm keytape drill chuck clamping tool holder, or precision spring keytape dri... |
|
BT30-APU10 Drill chuck |
If you are looking for China, CNC lathe, milling bt30-apu10 drill chuck clamping tool holder, or precision spring bt30-apu10 drill chuck CNC tools ... |
|
NT40 Pull Stud |
If you are looking for China, CNC lathe, milling nt pull stud nt40 pull stud clamping tool holder, or precision spring nt pull stud nt40 pull stud ... |
|
BT- MTB CNC Lathe Turning Tool Holder |
Brief introductionBT- MTB CNC Lathe Turning Tool Holder, suitable for clamping type DIN228-1A with flat tail Morse tool holder. high speed and high... |
All supplier products
Same products