STEEL PDC BIT

• 

The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving part is also inlaid with diamond blocks or other wear-resistant materials on the drill body.

Steel PDC bit is suitable for fast drilling in the stratum which is easy to drill at the bottom of the compressive strength without gravel, and it has a wide flow channel also in the timely transportation of rock brow.

Different Types Of Steel PDC Bit For Sale

Steel PDC Drill Bit

Steel PDC bits are mainly used in difficult to drill formations with high gravel and compressive strength.

Features Of Steel PDC Bit

The Steel PDC bit is a one-piece bit, and the bit parts should not fall off during drilling, so it can be used at higher speed and can withstand greater lateral load without downhole accidents.

The Steel Body PDC bitmainly relies on the cutting action of the PDC composite piece to break the rock, similar to the cutting principle of the scraper bit, with low torque and good stability during drilling, and high mechanical drilling speed under smaller drilling pressure and high rotational speed.

Steel PDC bits are wear-resistant and long-lasting when used correctly, and are suitable for deep wells and abrasive formations.

Advantages Of Steel Body Over Matrix Body PDC Bits

The entire body of the Steel PDC Bitis made of medium carbon steel and machined.The PDC cutting teeth are fixed to the crown of the drill by means of a pressure fit. The crown of the bit is surface hardened (sprayed with tungsten carbide wear layer, carburized, etc.) to increase its resistance to erosion. The main advantage of this type of drill bit is the simplicity of the manufacturing process. Steel Body Bits have a larger chip flute area, higher flank height and narrower flank thickness than tire body bits.

SML produces Steel Body PDC bits with tungsten carbide dressing wear layer, which enhances the wear resistance and erosion resistance of the steel body PDC bit flanks; improves the hydraulic performance for drilling in soft strata, resulting in better chip evacuation; enhances the protection of cutting teeth; improves the reliability and erosion resistance of the bit; and combines the advantages of tire body bits and steel bits to increase the mechanical drilling speed.

As one of pdc bit manufacturers, we will do our best to meet all the needs of customers.

Другие товары поставщика

	PDC CUTTER	The artificial pcd insert, crafted from polycrystalline diamond cuttersintegrated with a carbide matrix, combines diamond's inherent hardness and t...
	MATRIX PDC BIT	Matrix body pdc bitsare specialized cutting tools designed for drilling in hard and abrasive formations, typically encountered in the oil and gas i...
	Hybrid Drill Bit	The hybrid bituses a mixed cutting method. The tricone bit is to be broken by impact on the stratum, and then the PDC blade is cut to effectively p...
	STEEL TOOTH BIT	The teeth of Steel Tooth Bitare made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of the...
	PDC BIT	Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move dr...

Похожие товары

	3 Ton Rail Lifting Carrying Tongs	Продавец: 834406	铁路奇格尔灯 可广泛应用于铁路、船舶等交通运输行业和一些特殊行业，如信号指示、安全警示和工作照明。
	Grinding Head X 1/4inch	Продавец: Keying Abrasives	KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
	Grinding Head X 1-3/16inch	Продавец: Keying Abrasives	KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
	Grinding Head X	Продавец: Keying Abrasives	KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
	Grinding Head G - T Shape (T)	Продавец: Keying Abrasives	KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc...