.

STEEL PDC BIT

The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving part is also inlaid with diamond blocks or other wear-resistant materials on the drill body.

Steel PDC bit is suitable for fast drilling in the stratum which is easy to drill at the bottom of the compressive strength without gravel, and it has a wide flow channel also in the timely transportation of rock brow.

Different Types Of Steel PDC Bit For Sale

Steel PDC Drill Bit

Steel PDC bits are mainly used in difficult to drill formations with high gravel and compressive strength.

Features Of Steel PDC Bit

The Steel PDC bit is a one-piece bit, and the bit parts should not fall off during drilling, so it can be used at higher speed and can withstand greater lateral load without downhole accidents.

The Steel Body PDC bitmainly relies on the cutting action of the PDC composite piece to break the rock, similar to the cutting principle of the scraper bit, with low torque and good stability during drilling, and high mechanical drilling speed under smaller drilling pressure and high rotational speed.

Steel PDC bits are wear-resistant and long-lasting when used correctly, and are suitable for deep wells and abrasive formations.

Advantages Of Steel Body Over Matrix Body PDC Bits

The entire body of the Steel PDC Bitis made of medium carbon steel and machined.The PDC cutting teeth are fixed to the crown of the drill by means of a pressure fit. The crown of the bit is surface hardened (sprayed with tungsten carbide wear layer, carburized, etc.) to increase its resistance to erosion. The main advantage of this type of drill bit is the simplicity of the manufacturing process. Steel Body Bits have a larger chip flute area, higher flank height and narrower flank thickness than tire body bits.

SML produces Steel Body PDC bits with tungsten carbide dressing wear layer, which enhances the wear resistance and erosion resistance of the steel body PDC bit flanks; improves the hydraulic performance for drilling in soft strata, resulting in better chip evacuation; enhances the protection of cutting teeth; improves the reliability and erosion resistance of the bit; and combines the advantages of tire body bits and steel bits to increase the mechanical drilling speed.

As one of pdc bit manufacturers, we will do our best to meet all the needs of customers.



在线联系供应商

至: WUHAN SML TOOLS LIMITED
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

5 Wings PDC Drag Bit
5 Wings PDC Drag Bit Drag bits for water well drilling by using a polycrystalline diamond compact cutter, has high hardness and wear resistance, the drag bit blade betw...
PDC BITS- MAKE MAXIMIZE PERFORMANCE
PDC BITS- MAKE MAXIMIZE PERFORMANCE PDC bit for saleare polycrystalline diamond compact bits. PDC bitare widely used in oil drilling because of their fast drilling speed, long life an...
ROCK REAMER
ROCK REAMER There is no fixed tooth shape and bearing for the hdd rock reamer, so it is necessary to select appropriate tooth shape and bearing structure accor...
TCI Tricone Bit
TCI Tricone Bit Under the effect of the WOB and the twist of the drill string, the teeth of the tci tricone bit are crushed and eaten into the rock, and at the sam...
PDC BITS- MAKE MAXIMIZE PERFORMANCE
PDC BITS- MAKE MAXIMIZE PERFORMANCE PDC Bit for Sale PDC bits are polycrystalline diamond compact bits. PDC bits are widely used in oil drilling because of their fast drilling speed, ...
供应产品

Same products

Grinding Head X 1/4inch
Grinding Head X 1/4inch 卖方: Keying Abrasives KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
Grinding Head X 1-3/16inch
Grinding Head X 1-3/16inch 卖方: Keying Abrasives KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
Grinding Head X
Grinding Head X 卖方: Keying Abrasives KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard s...
Grinding Head G - T Shape (T)
Grinding Head G - T Shape (T) 卖方: Keying Abrasives KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc...
Grinding Head G - Triangular Trapezoid Shape (TT)
Grinding Head G - Triangular Trapezoid Shape (TT) 卖方: Keying Abrasives KEYING Mounted Head is made of imported raw materials and special equipment with automatic produc...