PE Blow Molding Bag
Pe
bag product introduction:
PE
is a kind of thermoplastic resin which is made by the polymerization
of ethylene. In industry, it also includes a copolymer of ethylene
and a small amount of alpha olefin.
Polyethylene
no odor, non-toxic, it feels like wax, has excellent resistance to
low temperature performance (minimum temperature can reach 70 ~ 100
DEG C), good chemical stability, ability of most acid-base erosion
(impatience with the oxidizing properties of acid), room temperature
insoluble in common solvents, low water absorption, electrical
insulation performance excellent.
PE
bag is very versatile, is mainly used for manufacturing thin films,
containers, pipes, wire and cable, daily necessities, such as and as
television, radar and other high-frequency insulating materials.
According
to the production process is divided into: PE flat bag, zipper bag,
clip chain bag, envelopes, bags, punching bag, arm in arm bag, zipper
bag, PE membrane.
1,
PE flat pocket for the simple production process, by machine blown
film, bag making machine cut into a bag, the bottom sealing.
2,
bag by time machine for blowing with a bone, manual sealing.
Different from the clip chain bag, the general two bags are easy to
confuse.
The
3, clip chain bag by PE film, on the top with two clip chain (the
clip chain is separate out) made bag, bag both sides generally have
relatively wide indentation, and the self styled bags did not. Color
printing bag, and clip chain bag can be printed with complex pattern.
4,
the envelope is like an envelope with a tongue, the tongue is stuck
on a tape, folding can be sealed bag. General clothing category with
more. And express bag is actually a kind of envelope.
5,
punching bag is to make a hole in the pocket at the top position, to
facilitate the carry bag.
6,
arm in arm bag is to be at the top of the bag and plastic film strip,
convenient bags up, the process of consumption of artificial, the
cost is relatively high.
7,
the zipper bag is in the bag seal on the zipper and take a zipper
cap.
8,
PE film is the machine to blow out the bag after the film. It is also
divided into the film and the film of the film.
The
market is commonly used by a count and by the length of the (volume).
(a) small pouch is mainly used for packing accessories, electronic
products.
Product
accessories bags have antistatic effect, the mouth of the bag is
divided into flat mouth and self sealing structure, and the bone (PE)
bone bags pocket or bag compacting.
Another
PE material can also be known as the plastic wrap PE bag, note that
the fresh film directly contact with food must choose PE material
(the other is generally PVC), the human body is relatively safe. The
transparency, tensile properties and viscosity of PVC films were
better than that of PE. PVC cling film in fire, black flame, take
black smoke, pungent odor, no drop of oil, leaving the fire will
automatically extinguish. While the PE film is burning, the flame is
yellow, tasteless, will drop the oil, and can continue to burn after
leaving the fire.
moplastic resin which is made by the polymerization
of ethylene. In industry, it also includes a copolymer of ethylene
and a small amount of alpha olefin.
Polyethylene
no odor, non-toxic, it feels like wax, has excellent resistance to
low temperature performance (minimum temperature can reach 70 ~ 100
DEG C), good chemical stability, ability of most acid-base erosion
(impatience with the oxidizing properties of acid), room temperature
insoluble in common solvents, low water absorption, electrical
insulation performance excellent.
PE
bag is very versatile, is mainly used for manufacturing thin films,
containers, pipes, wire and cable, daily necessities, such as and as
television, radar and other high-frequency insulating materials.
According
to the production process is divided into: PE flat bag, zipper bag,
clip chain bag, envelopes, bags, punching bag, arm in arm bag, zipper
bag, PE membrane.
1,
PE flat pocket for the simple production process, by machine blown
film, bag making machine cut into a bag, the bottom sealing.
2,
bag by time machine for blowing with a bone, manual sealing.
Different from the clip chain bag, the general two bags are easy to
confuse.
The
3, clip chain bag by PE film, on the top with two clip chain (the
clip chain is separate out) made bag, bag both sides generally have
relatively wide indentation, and the self styled bags did not. Color
printing bag, and clip chain bag can be printed with complex pattern.
4,
the envelope is like an envelope with a tongue, the tongue is stuck
on a tape, folding can be sealed bag. General clothing category with
more. And express bag is actually a kind of envelope.
5,
punching bag is to make a hole in the pocket at the top position, to
facilitate the carry bag.
6,
arm in arm bag is to be at the top of the bag and plastic film strip,
convenient bags up, the process of consumption of artificial, the
cost is relatively high.
7,
the zipper bag is in the bag seal on the zipper and take a zipper
cap.
8,
PE film is the machine to blow out the bag after the film. It is also
divided into the film and the film of the film.
The
market is commonly used by a count and by the length of the (volume).
(a) small pouch is mainly used for packing accessories, electronic
products.
Product
accessories bags have antistatic effect, the mouth of the bag is
divided into flat mouth and self sealing structure, and the bone (PE)
bone bags pocket or bag compacting.
Another
PE material can also be known as the plastic wrap PE bag, note that
the fresh film directly contact with food must choose PE material
(the other is generally PVC), the human body is relatively safe. The
transparency, tensile properties and viscosity of PVC films were
better than that of PE. PVC cling film in fire, black flame, take
black smoke, pungent odor, no drop of oil, leaving the fire will
automatically extinguish. While the PE film is burning, the flame is
yellow, tasteless, will drop the oil, and can continue to burn after
leaving the fire.
Other supplier products
|
Silicone Extruded Products |
silicone extruded products:Out of silicone products is usually through extrusion machine extrusion silicone molding, extrusion shape silicone is a ... |
|
Silicone /rubber Sleeve |
Production and sales of various specifications of silicone /rubber sleeve,silicone parts,the price is cheap, quality assurance. Welcome to purchase... |
|
The Silicone Cup Cover Set |
The silicone cup cover set:Silicone product characteristics: Raw materials using 100% environmentally friendly silica gel: food is made of silica g... |
|
Silica Gel Ring |
Silica gel ring Product parameters:ShapeSilica gel ringModelComplete specificationsApplicable scopeElectrical, decoration, plumbing, machinery, toy... |
|
Silicone Cake Mould |
Silicone cake mold: 1 professional production, wholesale processing liquid silicone cake chocolate mold, the use of high - quality food grade silic... |
All supplier products
Same products
|
High precision Anti-dielectric PPS+GF30 optical fiber plastic connector adaptor mold manufacturer |
Seller: 840661 |
TECHMOULD help our customers to take their ideas to a finished product. We not only provide mol... |
|
PMMA scrap for sale, Acrylic scrap supplier, PMMA Acrylic scrap for sale, pmma acrylic scrap supplier |
Seller: Ivory Hong Recycling |
At IvoryPhar Inc, we are dedicated to fostering sustainability and responsible material managemen... |
|
HDPE Regrinds from Drums Blue, HMW HDPE Drum Regrind, HDPE scrap suppliers |
Seller: Ivory Hong Recycling |
At IvoryPhar Inc, we are dedicated to advancing sustainability and promoting responsible recyclin... |
|
Baled HDPE Milk, HDPE bottle scrap supplier, HDPE milk bottle scrap supplier |
Seller: Ivory Hong Recycling |
At IvoryPhar Inc, we are dedicated to advancing sustainability and responsible resource managemen... |
|
pu foam scrap for sale, scrap foam supplier, polyurethane foam scrap, PU foam scrap supplier |
Seller: Ivory Hong Recycling |
At IvoryPhar Inc, we are dedicated to sustainability and responsible resource management. We are ... |