Anmei-TPU Flame Retardant for Engineering Plastics
Anmei-TPU Flame Retardant for Engineering Plastics
TPU thermoplastic polyurethane elastomer is a type of polyurethane elastomer. It not only has the high elasticity of rubber but also has the plasticity of polymer materials.TPU (polyurethane) is flammable, and its limiting oxygen index (LOI) is about 18%. The flame-retardant TPU produced by Anmei has good tensile strength and abrasion resistance.
TPU Flame Retardant Features
Main features：
Hardness 92 ShA
Density 1.25g/cc
Chemical resistance(hydrocarbon, petrol,oil and grease)
The color masterbatch uses TPU resin as the carrier, and the addition amount is1%~2%
In order to ensure the best performance index after extrusion, the material mustbe dried before processing, and the moisture content of the particles shouldnot exceed 0.02%.It is recommended that the material be dried at 80~110C for2~4h
TPU Flame Retardant Benefits
Communication fiber optic cables (optical fiber cables and data lines)
-Excellent mechanical properties
- Good wear resistance
- High and low temperature cracking resistance
- UV resistant
Wind power cable
- Torsion resistant
Robot cable
- Resistant to bending and torsion
- The number of twists is more than 10,000 times, in line with the robot industry alliance standard CRIA0003-2016
Low temperature drag chain cable
- Good flexibility
- Good abrasion resistance
- Bending fatigue resistance
- Flame retardancy
It is suitable for cables that work at low temperature (-50~-70°C, relative humidity 95±3%)
TPU Flame Retardant Application
Flame retardant TPUis widely used in the field of 5G optical cables and cables, power cords, data cables and plugs in the electrical and electronic fields as well as in the automotive and new energy fields. It is essential for such a use that the polymers should have been flame-retarded, to help protect against ignition due to sparks and short-circuits.
With the enhancement of environmental protection awareness, the electrical and electronic industries are fully halogen-free.
New Cable Sheath Material-TPU Flame Retardant Introduction
TPU has good flame-retardant technology and mechanical properties, making it a new type of cable halogen-free and low-smoke flame-retardant sheath material.
The flame-retardant TPU tensile strength is 20-50MPa, and the stress at break is 300-700%. Compared with other commonly used cable sheath materials like PVC or natural rubber or neoprene, it has wear resistance, oil resistance, high-energy radiation resistance, tear resistance, ozone resistance, low-temperature flexural resistance and other comprehensive properties are better.
If you want to buy masterbatch, please visit our website.
Send product request
Other supplier products
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | PA66 GF15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding. PA66 GF15 Storage and Handling PRE-PROCESS... |
 |
PA66 GF45 (A2011I) | PA66 GF45is a 45% glass fiber reinforced polyamide 6.6 with high stiffness and strength. Typical Application of PA66 GF45(A2011I) PA66 45%GF HB... |
 |
PA66 GF30 Halogen-free FR (A2015F) for Engineering Plastics | Material PA66 GF30FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and i... |
 |
PA66 GF20 With High Tensile Strength (A2307D, A2317D) for Engineering Plastics | Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF 20, it shows high oil resistance, high impact resistance, good resistance to lo... |
 |
Anmei-PA66 GF for Engineering Plastics | Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with propertiesof heat-resistant, reinf... |
Same products
 |
Customized High Precision Nylon ABS PP PC PBT Automotive part Injection molding Plastic injection mold | Seller: 840661 | As a one-stop injection mold supplier,TECHMOULDcan provide you with a full range of mold manufact... |
 |
HIGH PRECISION PLASTIC MOLD FOR AUTOMOTIVE/MEDICAL /CONSUMER/ELECTRICAL INDUSTRIES | Seller: 840661 | TECHMOULD help our customers to take their ideas to a finished product. We not only provide mold ... |
 |
High precision Anti-dielectric PPS+GF30 optical fiber plastic connector adaptor mold manufacturer | Seller: 840661 | TECHMOULD help our customers to take their ideas to a finished product. We not only provide mol... |
 |
PMMA scrap for sale, Acrylic scrap supplier, PMMA Acrylic scrap for sale, pmma acrylic scrap supplier | Seller: Ivory Hong Recycling | At IvoryPhar Inc, we are dedicated to fostering sustainability and responsible material managemen... |
 |
HDPE Regrinds from Drums Blue, HMW HDPE Drum Regrind, HDPE scrap suppliers | Seller: Ivory Hong Recycling | At IvoryPhar Inc, we are dedicated to advancing sustainability and promoting responsible recyclin... |
