API 7-1 NMDC P550 Non-magnetic Drill Collar
API 7-1 NMDC P550 Non-magnetic Drill Collar
Titanium alloy Non -magnetic drill collars
1.Material: GR5 Ti-6Al-4V, TC4, TC11
2.Standard: API
3.Property
Non -magnetic drill collars mainly uesed in the field of petroleum . It has an excellent physical mechanical properties.
For example: high tensile, low density, high erosionrestance ,durability, dystectic point and high aseismicity. Because of it's high erosionresistance, it can also be used in subsurface environment operation.
3.Features:(1). non-magnetic, it can not be magnetized in the powerful magnetic field.
(2).Light specific gravity
(3).High anticorrosion and the resistance of fouling
Specifacation:
The drill collars are made of modified AISI 4145H chromium molybdenum alloy steel. These drill collar bars are full-length heat treated and water quenched to obtain ASTM A-370 mechanical properties. Full mechanical and chemical mill test certifications are supplied with all drill collars. These mill test certifications guarantee a hardness range of 285 to 341 BHN and an impact value of 40 ft.-lbs. at room temperature one inch below the surface.
To ensure close tolerance bores, all drill collar bars are trepanned then drifted to API specifications. Bar surface finish is “as rolled” which is original mill finish.
CONNECTIONS:
All connections are precision-machined to API specifications. API relief groove pin and bore back box stress relief are available on request. Thread roots are cold-worked to offer a greater resistance to fatigue. All connections are phosphated to minimize galling during makeup and applied with thread storage compound. Thread protectors are installed to ensure adequate joint protection during shipment.
SPIRAL DRILL COLLARS:
The spiral cut is added to a drill collar to prevent the likelihood of differential wall-sticking by reducing wall contact between the drill collar and the wall of the hole. The box end of the spiral collar is left uncut from 79 inches from box
shoulder and the pin end is left uncut 30 inches from the pin shoulder.
|
Connections |
OD mm |
ID mm |
Length mm |
|
|
NC23-31 |
79.4 |
31.8 |
9150 |
|
|
NC26-35 |
88.9 |
38.1 |
9150 |
|
|
NC31-41 |
104.8 |
50.8 |
9150 or 9450 |
|
|
NC35-47 |
120.7 |
50.8 |
915 or 9450 |
|
|
NC38-50 |
127.0 |
57.2 |
9150 or 9450 |
|
|
NC44-60 |
152.4 |
57.2 |
9150 or 9450 |
|
|
NC44-60 |
152.4 |
71.4 |
9150 or 9450 |
|
|
NC44-62 |
158.8 |
57.2 |
9150 or 9450 |
|
|
NC46-62 |
158.8 |
71.4 |
9150 or 9450 |
|
|
NC46-65 |
165.1 |
57.2 |
9150 or 9450 |
|
|
NC46-65 |
165.1 |
71.4 |
9150 or 9450 |
|
|
NC46-67 |
171.4 |
57.2 |
9150 or 9450 |
|
|
NC50-67 |
171.4 |
71.4 |
9150 or 9450 |
|
|
NC50-70 |
177.8 |
57.2 |
9150 or 9450 |
|
|
NC50-70 |
177.8 |
71.4 |
9150 or 9450 |
|
|
NC50-72 |
184.2 |
71.4 |
9150 or 9450 |
|
|
NC56-77 |
196.8 |
71.4 |
9150 or 9450 |
|
|
NC56-80 |
203.2 |
71.4 |
9150 or 9450 |
|
|
6 5/8REG |
209.6 |
71.4 |
9150 or 9450 |
|
|
NC61-90 |
228.6 |
71.4 |
9150 or 9450 |
|
|
7 5/8REG |
241.3 |
76.2 |
9150 or 9450 |
|
|
NC70-97 |
247.6 |
76.2 |
9150 or 9450 |
|
|
NC70-100 |
254.0 |
76.2 |
9150 or 9450 |
|
|
8 5/8REG |
279.4 |
76.2 |
9150 or 9450 |
|
Any question,welcome to contact me by
src="" alt="API 7-1 NMDC P550 Non-magnetic Drill Collar" width="618" height="618" data-alt="API 7-1 NMDC P550 Non-magnetic Drill Collar" data-width="618" data-height="618" />
Send product request
Other supplier products
 |
API Ceramic Liner for PZ-8 Mud Pump | Mud Pump Ceramic Liner Product Description API 7K ceramic cylinder liner mud pump liner spare parts /accessories liner Lake Petro’s ... |
|
|
API 7-1 NMDC P550 Non-magnetic Drill Collar | API 7-1 NMDC P550 Non-magnetic Drill Collar Titanium alloy Non -magnetic drill collars 1.Material: GR5 Ti-6Al-4V, TC4, TC11 2.Standard: API 3.P... |
 |
API Casing Power Tong TQ340-35Y | API Casing Power Tong TQ340-35Y Product Description TQ Series of Casing Tongs TQ series of Casing Tongs are widely used for making up or b... |
 |
Metrix Body PDC bit for Hard Formation | Metrix Body PDC bit for Hard Formation Lake Petro Company specializes in designing, manufacturing, marketing and serving the high performance diam... |
 |
API BOP Ram / Ram Packers / Rubber Seal | API BOP Ram / Ram Packers / Rubber Seal Product Description API 16A BOP spare parts and BOP variable ram. We can supply all series BOP ram ... |
Same products
 |
RC3 Bluetooth LED Jump Rope with Metal Housing | Seller: Shenzhen Yan Xing Science & Technology Co., Ltd. | RC3 Bluetooth LED Jump Rope with Metal Housing RC3 is a smart-fit Bluetooth jump ropewith a hard... |
 |
Pedestal Rockbreaker Boom System | Seller: Shandong YZH Machinery Equipment Co., Ltd | YZH pedestal rockbreaker boom system consists of pedestal booms, hydraulic hammer, hydraulic powe... |
 |
Rockbreaker Boom System WHC860 | Seller: Guangxi YZH Machinery Equipment Co., Ltd | A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks int... |
 |
Rockbreaker Boom System WHEN1850 | Seller: Guangxi YZH Machinery Equipment Co., Ltd | A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks int... |
 |
Rockbreaker Boom System WHEN1510 | Seller: Guangxi YZH Machinery Equipment Co., Ltd | A rockbreaker is a machine designed to manipulate large rocks, including reducing large rocks int... |
