Pumice micronizer
Pumiceis a kind of volcanic rock which consists of highly vesicular rough textured volcanic glass, which may or may not contain crystals. It is typically light colored. Pumice is created when super-heated, highly pressurized rock is violently ejected from a volcano. The unusual foamy configuration of pumice happens because of simultaneous rapid cooling and rapid depressurization. The depressurization creates bubbles by lowering the solubility of gases (including water and CO2) that are dissolved in the lava, causing the gases to rapidly exsolve (like the bubbles of CO2that appear when a carbonated drink is opened).
is professionally processing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, the moisture under 5% such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rock phosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.
Finishedpumice powder fineness: 47-5 micron (325mesh-2500mesh)
Capacity: 0.4-12T per hour
ModelspumiceMicronizer: HGM80/HGM90/HGM100/HGM100A/HGM125
Working principle:
1) After crushed by hammer crusher, the large materials become smaller pieces and are sent to the micro powder grinding mill.
2) When the micro powder grinding mill is at work, the granulated materials are crushed and grinded by the rollers into particles below 47micron.
3) The high-pressure air blower constantly inhales air within the micro powder grinding mill.
4) Along with the high speed airflow, micronized materials are brought to the classifier.
5) The qualified particles are screened and driven into the cyclone powder collector, finally exit from the discharging valve at the bottom;
6) A small proportion of the fine powders, with airflow, moving to the dust cleaner. Filtered clean air will be emitted from the air outlet of muffler in the end.
Technicaldataof:
| Model |
HGM80 |
HGM90 |
HGM100 |
HGM100L |
HGM125 |
| Ring Diameter(mm) |
800 |
930 |
1035 |
1035 |
1300 |
| Ring Number/pcs |
3 |
3-4 |
3 |
4 |
4 |
| Roller Number/pcs |
21 |
24-32 |
27 |
34-36 |
40-44 |
| Main Shaft Speed/r. p. min |
230-240 |
200-220 |
180-200 |
180-200 |
135-155 |
| Input Size/mm |
≦20 |
| Finished Size/um |
|
| Capacity t/h |
0.5-4.5 |
0.6-6.5 |
0.7-7 |
1-8.5 |
1.5-12 |
| Outlet Size L*W*H/m |
13.9*4*6.2 |
14.7*4.8*7.2 |
18*4.6*8.6 |
18*4.6*8.6 |
14*9*10.25
|
Other supplier products
|
|
Ultra Fine Vertical Roller Mill Plant |
Introduction of ultra fine vertical roller mill plant
Raw materials: stone with Moh’s hardness less than 9.3 and humidity less than 6%
Capaci... |
|
|
Precipitated silica vertical mil China |
The most common use (70%) of precipitated silica is as a pigment and reinforcing phase in automobile tires. Precipitated silica also helps conduct ... |
|
|
Calcined steatite powder milling machine |
Steatite is also known as soapstone or soap rock. Steatite is relatively soft (because of the high talc content, talc being one on Mohs hardness sc... |
|
|
YGM9517 Raymond Mill |
Introduction ofYGM9517 Raymond MillShanghai Clirik Machinery Co., Ltd is an professional expert Rammond mill manufacturer in China.YGM9517 Raymond ... |
|
|
Calcium Carbonate Raymond Mill |
introduction of Calcium carbonate raymond mill:Calcium carbonate raymond mill, also known as Raymond Grinder or Pendulum Grinder, is designed by CL... |
All supplier products
Same products
