PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics
PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20products for many years. We can provide you with the best chemical material. If you need high-quality pa6 abs gf20, you can fill out the form below to connect with us.
Benefits of pa6gf20
Flame retardant pa material
Semi crystalline thermoplastic
Good impact strength and stiffness
Good low temperature performance
Outstanding wear resistance
Good temperature resistance
The degradation of thermal oxidation is reduced
Improved long-term heat and stability to ultraviolet and visible light
PA6 GF20Application
The automotive industry using pa6 6gf25includes many components, such as automotive dashboard, exterior panel, interior trim panel and steering Panels, soundproof panels, door locks, bumpers and air ducts. In terms of electrical appliances, pa6 gf20 fris widely used in refrigerators, televisions, washing machines, air conditioners, computers, copiers and other electronic appliances.
In terms of building materials, PA6 GF20 is widely used in packaging, furniture, sports and entertainment products, machinery and instrumentation industries.
Typical Application of PA6 GF20 heat stabilized (A1006D)
Glass fiber 20% PA6 reinforced (25% GF is workable as well) can be used for heat-resistant and high-strength structural parts such as machinery, auto parts, power tools, coil frames, engine covers, etc.
Processing Detail of PA6 GF20 heat stabilized (A1006D)
Other Details of PA6 GF20 heat stabilized (A1006D)
Physical Property of PA6 GF20
|
Ash |
(15.0% 1 ISO3451/1) |
|
Conditioned |
600°C*2h |
|
Density |
(1250Kg/m3 1 ISO1183) |
|
Conditioned |
23°C |
|
Shrinkage Parallel Flow |
(0.5-0.7 % 1 ISO294-4) |
|
Shrinkage Vertical Flow |
(0.7-1.1% I ISO294-4) |
Mechanical Propertiesof PA6 GF20
|
Tensile strength(125.0MPa 1 ISO527) Conditioned |
5mm/ min |
|
Tensile Strain at Break(2.5% I ISO527) Conditioned |
|
|
Notched Impact Strength(125 0MPa I ISO527) Conditioned |
2mm/min |
|
Flexural Strength(190MPa 1ISO178) Conditioned |
2mm/min |
|
Flexural Modulus(5700 MPa I ISO178) Conditioned |
5mm/ min |
Thermal Propertyof PA6 GF20
|
Melting Point |
(220°C I ISO11357) |
|
Hot Deformation Temperature |
(175*C I ISO75) |
|
Conditioned |
|
|
Flammability Class |
(HB 1UL94) |
|
Conditioned |
mm |
Injection Molding Conditionsof PA6 GF20
|
Drying Temperature |
130°C |
|
Drying Time |
3h |
|
Cylinder Temperature |
240-260°C |
|
Nozzle Temperature |
240-260*C |
|
Tooling Temperature |
80*C |
* Molding conditions arejustfor reference, please make an adjustment based on the actual situation！
Suzhou ANMEI groupMaterial Technology Co., Ltd. – the professional supplier of engineering plastic and the color masterbatch was founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
Send product request
Other supplier products
 |
Anmei-Polyamide Nylon 6 (PA6) for Engineering Plastics | Other than fiber-reinforcedpa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one of the professional nylon 6 suppliers/manufacturers,... |
 |
Engineering Plastic | We are here to be your reliable partners of modified plastic. Engineering plastic is the high-performance plastic that can apply in different indu... |
 |
Anmei-PA66 GF for Engineering Plastics | Anmei focuses on the production of modified engineering plastics. We have polyamide pa66modified products with properties of heat-resistant, rei... |
 |
PA66 GF35 (A2000G, A2011G, A2111G) for Engineering Plastics | PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa6 6gf35, that is, 35% glass fiber is added to nylon 66. Typic... |
 |
PA66 GF20 With High Tensile Strength (A2307D, A2317D) for Engineering Plastics | Elastomer toughened nylon 66 with 20% glass fiber is called PA66 GF 20, it shows high oil resistance, high impact resistance, good resistance to lo... |
Same products
 |
COLMAST®CW1350 (WHITE MASTERBATCH) | Seller: ADC PLASTIC., JSC | COLMAST CW1350 is a perfect choice because of the outstanding advantages and the combination with... |
 |
CALMAST®MN570 – PP CALCIUM CARBONATE FILLER MASTERBATCH | Seller: ADC PLASTIC., JSC | CALMAST MN570 is a perfect choice to help plastic product manufacturers optimize costs and improv... |
 |
CALMAST®MF530 – PP CALCIUM CACBONATE FILLER MASTERBATCH | Seller: ADC PLASTIC., JSC | CALMAST MF530 is a perfect choice to help plastic product manufacturers optimize costs and improv... |
 |
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA6 FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Applicati... |
 |
PA6 GF30 Halogenated FR (A1014F) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA6 GF 30 FRis a PA6 with 30% glass-fibers and halogens flame retardant. PA6 GF30 Halogenated ... |
