FILTER CARTRIDGES
MELT BLOWN FILTER CARTRIDGESJM melt blown filter cartridges are self-bonded and structured with three different fibers,Website:, inside thin and outside thick, which better purifies water, increases the filter impurity capacity, prolongs its service life and thus lowers the cost. FEATURES: 100% pure polypropylene construction Wide chemical compatibility No lubricants or anti-static additives Higher dirt holding capacity Consistent filtration over the life of the cart ridges Low pressure drop APPLICATIONS: Residential and commercial water treatment Fine chemical, reagents, solvents, resins Coatings Edible oils Liquors, juices, sugars Make-up water SPECIFICATIONS: Outside Diameter: 62mm, 63mm, 65mm, 115mm Inner Diameter: 28mm, 30mm Length: 5", 10", 20", 30", 40", 50" Micron rating (nominal ) : 1, 5,10, 20, 30, 50, 70, 100micron Filter Media: polypropylene Maximum operating temperature Rating: 52°C Product CodeMicron RatingLENGTHCASEDimension(CM)Ship WeightJMSF-100119-7/8"5053x34x348kgsJMSF-100559-7/8"5053x34x348kgsJMSF-1010109-7/8"5053x34x348kgsJMSF-1020209-7/8"5053x34x348kgsJMSF-1030309-7/8"5053x34x348kgsJMSF-1050509-7/8"5053x34x348kgsJMSF-2001120"2553x34x348kgsJMSF-2005520"2553x34x348kgsJMSF-20101020"2553x34x348kgsJMSF-20202020"2553x34x348kgsJMSF-20303020"2553x34x348kgsJMSF-20505020"2553x34x348kgsJMSF-3001130"2578x34x3411kgsJMSF-3005530"2578x34x3411kgsJMSF-30101030"2578x34x3411kgsJMSF-30202030"2578x34x3411kgsJMSF-30303030"2578x34x3411kgsJMSF-30505030"2578x34x3411kgsJMSF-4001140"25104x34x3414kgsJMSF-4005540"25104x34x3414kgsJMSF-40101040"25104x34x3414kgsJMSF-40202040"25104x34x3414kgsJMSF-40303040"25104x34x3414kgsJMSF-40505040"25104x34x3414kgsJMSF-BB-100559-7/8"1839x39x5311kgsJMSF-BB-2005520"939x39x5311kgs
Other supplier products
|
|
Pressure Tank |
Pressure TankSpecification:1)Material:inner shell-Polyethylene (PE),Website: shell-Fiberglass with Epoxy resin 2)Working pressure:1.0MPa/150Psi/10b... |
|
|
Canature Frp Tank |
Canature Frp TankSpecification:1)Material:inner shell-Polyethylene (PE),Website: shell-Fiberglass with Epoxy resin 2)Working pressure:1.0MPa/150Psi... |
|
|
Fleck Valve 2750 |
Fleck valve 2750Product DescriptionName:Fleck valve 2750 1" Commercial Control ValveFeatures:1.Suitable for large residential/light commercial appl... |
|
|
Pe Brine Tank |
Pe Brine TankAdvantages:1.Due to conic body,Website: Brine Tanks can be packed one by one any height which saves over 50% freight for the buyers2.F... |
|
|
FRP TANK |
FRP TANK
FRP TANK Specification:
1)Material:inner shell-Polyethylene (PE),Website: shell-Fiberglass with Epoxy resin
2)Work... |
All supplier products
Same products
