SPD for Audio Surge Protector
With a standard RJ11/45 interface, the audio signal lightning protection device is suitable for audio signal lightning protection of 1 to 4 pairs of dedicated communication lines and protection of trunk lines and internal lines of program-controlled exchanges.
Surge protector for audio equipmentis mainly used in tele, public broadcasting system to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over voltage, transient operation, and resonance over voltage. We provide ADSL surge suppressor, APC mobile surge arrester, surge protector with jack for landline , as well as many other customized audio SPD unit. For more information, please feel free to contact us.
Features of SPD for Audio Surge Protector
lMulti. Protection circuits, Gas-Tube+ TVS technology
lDual protection in Common module and different module
lMulti-Strike Capability
Application of SPD for Audio Surge Protector
Designed for Audio device not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge.
lTele, Fax
lISDN, DDN, DSL, ADSL, VDSL
lBroadcast system
Technical parameters of SPD for Audio Surge Protector
|
Model |
D180R2 |
R180R4 |
D180R2-16 |
D180Y2-10 |
D180Y2-A |
|
Lighning proection zone(LPZ) |
2 |
||||
|
Standards Compliance |
IEC61000, EN60950, GB/T18802.21-2002, TB/T2311-2002 |
||||
|
According to IEC61643 |
III |
||||
|
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||||
|
Max continuous operating voltage Uc |
180VDC |
||||
|
Nominal discharge current (8/20µs) In |
3KA |
||||
|
Max discharge current Imax (8/21µs) Imax |
5KA |
||||
|
Rated Load Current |
500mA |
||||
|
Cut-off Frequency fG |
16MHz |
||||
|
Series Impedance per line R |
|||||
|
Limiting Voltage(10/700µs) |
≤250V |
||||
|
Protection level @20kA, 8/20µs Up |
≤350V |
||||
|
Response time tA (L-N/N-PE) |
1ns |
||||
|
Protection line |
2,3/4,5 |
2/3,4/5 |
2,3/4,5 |
2 line |
2line |
|
Protection port |
1 |
2 |
16 |
10 |
1 |
|
Mounting |
Be installed between protected equipment and signal line |
||||
|
Transmission rate |
10Mbps |
||||
|
Dimension |
85(H)×25(W)×25(L)mm |
480 (H)×86(W)×42(L)mm |
96 (H)×43(W)×70(L)mm |
90 (H)×14(W)×65(L)mm |
|
|
Interface form |
RJ11 RJ11 RJ11 Inserting type clamped type |
||||
|
IP code(IEC EN 60529) |
IP20 |
||||
|
Max connecting line diameter |
|
||||
|
Material/color |
Aluminum/Blue |
||||
|
Recommend connection line diameter |
1 mm2 |
||||
|
Largest terminal installation torque |
|||||
|
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95％ |
||||
If you need any kinds of lightning surge protector,please contact us, as a professional surge protector factory, Techwin is willing to offer you high quality products.
Send product request
Other supplier products
 |
3 In 1 SPD For CCTV M10-12 D12BM D12Y2 | 3 in 1 monitor lightning arrester(power and control), a Kind of SPDfor power supply, designed for camera power, video, control line from lightning ... |
 |
SCB ( Surge Protector Circuit Breaker )-SSD ( SPD Specific Disconnector) | In low voltage power systems, a power surge circuit breaker(SCB)-SSD ( SPD Specific Disconnecotor) is an external disconnector used in series with ... |
 |
Lightning Protection PDU | Power lightning protection strips are mainly used for the final protection of AC power, used for terminal equipment, such as background machines, v... |
 |
Quarter Wave Surge Protective Device（SPD）N（L16）Access Network RF Protector | Quarter wave RF surge protectoris designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, in... |
 |
Din-rail DC Power SPD For PV Solar Power System | DC module for PV solar power system is mainly used to protect DC power system and electric and electronic equipment from lightning over-voltage and... |
