3 In 1 SPD For CCTV M10-12 D12BM D12Y2
3 in 1 monitor lightning arrester(power and control), a Kind of SPDfor power supply, designed for camera power, video, control line from lightning electromagnetic pulse, induced over-voltage, operating over -voltage.
Features of 3 In 1 SPD For CCTV M10-12 D12BM12Y2
Dual protection in Common module and different module
3 in 1 protection
TVS array technology, low capacitance
Multi-Strike Capability
Application Of 3 In 1 SPD For CCTV M10-12 D12BM D12Y2
Designed to protect monitor equipments (power, Date control, Video), widely applied in bank monitor & safe guard system.
Monitor equipment for school, enterprise, road etc. security and protection.
Technical Parameters of 3 In 1 SPD For CCTV M10-12 D12BM D12Y2
Model |
M10-12/D12BM/D12Y2 |
M10-24/D12BM/D12Y2 |
M10-220/D12BM/D12Y2 |
Lightning projection zone(LPZ) |
2 |
||
Standards Compliance |
IEC61643-1, EN60950,GB/T18802.21-2002,TB/T2311-2002, YD/T1235.2 |
||
According to IEC61643 |
III |
||
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 |
D |
||
Max continuous operating voltage Uc |
12VDC |
||
Nominal discharge current (8/20µs) In |
3KA |
||
Max discharge current Imax (8/21µs) Imax |
5KA |
||
Transmission rate |
Video:100Mbps Clamped type:10Mbps |
||
Limiting Voltage(10/700µs)component wire-Enclosure |
40V |
||
Nominal working voltage(Un) |
12V 24V 220V |
||
Max continuous operation voltage(Uc) |
15V 30V 275V |
||
Nominal discharge current Imax(8/20µs) |
5kA |
||
Max discharge current Imax(8/20µs) |
10kA |
||
Load current |
|||
Protection level Up ( In) |
60V 100V 900V |
||
Response time (Ta) |
1ns |
||
Mounting |
Be Installed between protected equipment and signal line |
||
Working conditions |
Clamped type |
||
Dimension |
122*80*30mm |
||
Interface form |
BNC(J,K acccording to the actual needs of the configuration) Video:BNC,PTZ control Clamped type |
||
IP code(IEC EN 60529) |
IP20 |
||
Error rate |
≤10-12 |
||
Material/color |
Aluminum/Blue |
||
Insertion loss |
≤.0.5dB |
||
Working conditions |
Temperature: -40 to 85℃, Relative humidity: ≤95% |
As one of surge protection device manufacturers, we will provide more kinds of related products for sale, anything you need, please contact us.
Send product request
Other supplier products
Smart Lightning Protective Devices | The smart spike guard, Techwin intelligent lightning surge protection device (smart spd), adopts the technology of Internet of things big data, int... | |
Type 1+2 /Class B+C Switch-type Gap Technology Lightning Surge Protector with TUV mark | These series products are mainly used for Type 1+Type 2 protection of power distribution systems (10/350µs) and are used to protect electrica... | |
2021 New design automatic circuit recloser/ Auto recloser | TD-CHZ16 protector integrates intelligent control functions such as over-current and short-circuit protection, under-voltage/over-voltage protectio... | |
Gas-tube coaxial GDT protector CATV RF Surge Arrester | Gas surge arrester, also called gas discharge tube lightning protection device, is designed for antenna coaxial device and receive/transmit system ... | |
AC Power SPD | AC power SPDis mainly applicable to the power distribution systems for Class I / II / III( Type1, type 2, type3) protection. Surge arresters for AC... |